Operating Guide
Sync Bob with his charging station
If Bob can’t nd his charging station, the station and Bob are out of sync and you
need to sync up their coding. Follow these steps:
1. Bring Bob close to his charging station.
2. Switch Bob OFF.
3. Press and hold the Select/Adjust button the charging station.
4. While holding the Select/Adjust button, turn Bob ON using the switch on his side.
5. Bob will emit two consecutive chirps to indicate the charging station has been
synchronized.
6. If you do not hear the chirps, turn Bob and the charging station OFF, disconnect
the station from the adapter, repeat the process (restart from step 1).
Charging Time
When Bob is charging, the battery bars show his charge level. Bob will display the
word READY on his screen as soon as his battery is full.
Bob can sit idly on his charging station for up to 5 consecutive days; afterward, you
should turn his side power switch OFF.