Operating Guide

Power - Puts Bob in standby mode.To put bObsweep in standby mode, the power
switch on Bob’s side is still turned ON.
To fully power Bob o, set the power switch on his side to OFF
Auto - Activates Bob’s default cleaning mode (Robot/Auto1).
Walls/Corners - Activates Bob’s Wall Track™ mode. Sets Bob to clean along walls
and perimeters of a room.
UV - Turns the UV light on and o.
Spot - Activates Bob’s Spiral Track™ mode. Sets Bob to clean using spiral,
spot-cleaning movements.
Charge - Sends Bob to search for his charging station.
Speed - Sets Bob’s speed to either slow, medium, or fast.
Navigation arrows - Guide Bob forward, backward, right, or left. Hold each button
down to keep Bob moving in the desired direction; release to stop him.
Pause (located in the middle of navigation arrows) - Pauses or un-pauses Bob’s
movement.