Operating Guide

Scheduling Cleaning
After setting the current time and day on Bob’s station, you can program Bob’s
weekly cleaning schedule. Keep in mind that Bob works on a 24 hour schedule.
To set the minutes, press the schedule (bell) button once. The digits for the
minutes will blink. Use the adjust (+) button to select the desired minutes and
press the schedule button again to move to the hour digits.
To set the hours, press the schedule (bell) button until the digits for hours
blink. Use the adjust (+) button to select the desired hours and press OK to save
or press the schedule button again to move to selecting the weekdays.
To set the weekday(s) you want Bob to clean, press the schedule (bell) button
until the icon Su for the rst weekday blinks.
Each weekday blinks for 5 seconds and then remains solid. This indicates that
the corresponding day has been selected for cleaning.
To move between days, use the adjust (+) button to move on to the next day.
If you would like to skip a certain day, press the (+) button while the weekday icon
is still blinking. When all desired days are selected, press OK to save.
To deselect a day, press the power button while the day is blinking.
If Bob’s charging station is unplugged or turned o for more than 8 hours, his
schedule will reset.
You can choose any and all weekdays for cleaning. Bob starts his cleaning at the
selected time (e.g. 14:30) on all programmed days (e.g. Mo, Tu, Th).