Operating Guide

Main Brush
Remove the Main Brush
Remove the screw on Bob’s main brush
using a Flat head screwdriver. Keep the
screw and the end piece (the main brush
holder) in a safe place away from children
‘s or animals’ reach.
Clean the Main Brush
It is recommended that you clean Bob’s
main brush on a regular basis. Use the
cleaning tool to remove dust and debris
from both ends of the brush, as well as
its compartment inside Bob. Use a pair
of scissors to cut o any hair or threads
wrapped around the brush.
Install the Main Brush
To reinstall the brush, replace the end
piece (main brush holder) and insert the
opposite end of the brush into the square
indentation inside Bob. Lastly, re-tighten
the screw.