Operating Guide
Trouble Number 10: Power System
Trouble number 10 means Bob’s power system is in trouble.
What to do:
The reason for trouble number 10 can range between the following
options:
The most likely reason for trouble 10 is that Bob has no charge left and is
starving. Plug him directly to the wall and allow him to charge for a few hours.
Bob’s battery connectors are loose. Open the battery compartment and check
the battery connectors.
If Bob shows trouble number 10 when placed manually on his charging station
it is because he is in standby mode and his charging plates are not activated. Press
CHARGE only once on Bob’s screen to activate his charging plates then put him on
the station.
If Bob starts showing trouble number 10 as soon as he automatically docks on
his charging station, the issue can be one of the following:
Bob is in need of a new charging station. To test this, plug Bob directly
to his adapter. If the issue is resolved charging station is the reason for Bob’s
trouble number.
If the issue persists after manual recharging and checking the battery
connection, it is likely that Bob’s adapter is the cause for the issue.