Operating Guide
6. My Bob won’t turn on no matter what I do.
If Bob only charged for a short amount of time and does not start after using his ON/
OFF switch or his charging station, it’s likely that his battery has drained too low to
operate. To recharge him, unplug the adapter that normally attaches to the charging
station and plug it directly into the inlet on Bob’s side. Let Bob recharge fully this way
before using again. After this procedure, you will be able to charge Bob manually
or automatically using the docking station. If you place Bob on his charging station,
always make sure to turn him ON rst, to activate the charging plates on his bottom.
When Bob charges, the battery bars on his display blink.
7. Why is my Bob beeping?
Bob beeps when he encounters a problem cleaning and needs assistance. Along
with his sounds, you will see a Trouble Number on the digital display which lets you
know why Bob has stopped. Consult this manual’s Trouble Numbers section to
resolve Bob’s error messages.
8. Bob is having trouble nding his charging station. Where is the
best place to put his station?
For Bob to nd his charging station, he needs to face it directly. Bob will nd his
station more easily if it you place it near the perimeter of the room with plenty of
space in front of it, so that he may detect the station from afar. In order for Bob to
dock properly, be sure to place the charging station about 2 inches away from the
wall, facing outward on a at surface like hardwood or tile ooring instead of carpet.
To facilitate Bob’s work, nd a spot for the charging station where Bob has a higher
chance of passing through.
9. I left Bob’s brush in for multiple cleans and am having problems
removing it.
If the main or side brushes are dicult to remove, it is likely because hair, string, or