User guide

JOB CONTROL WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 7-11
Input/Output—Stop, Continue, Sample
Use this window to stop or continue input processing and/or output
processing.
Figure 7-11. I/O window (chord mouse)
Open the I/O window by chording the mouse; that is, pressing both
the left and right buttons of the mouse at the same time.
Parameters Stop Input/Output: Select this option to stop both input processing
and printing.
Stop Input: Select this option to stop input processing only.
Stop Output: Select this option to stop printing only.
Continue Input/Output: Select this option to continue input
processing and printing after an interruption.
Continue Input: Select this option to continue input processing only.
Continue Output: Select this option to continue output processing
only.
Sample: Select this option to print a single page sample of the
current job being printed.
Note: To stop both input and output processing, you may also
press the <STOP> key on the keyboard.
To stop printing, you may also press the Stop button on the printer
control console.
To continue both input and output processing, you may also press
the <CONTINUE> key on the keyboard or select the Continue
header button on the Messages window.
To continue printing, you may also press the Continue button on the
printer control console.
To print a sample, you may also press the <SAMPLE> key on the
keyboard, or press the Sample button on the printer control console.
A print job must be in output processing in order to obtain a sample
print. Also, you may not print samples when the sample tray is the
output destination for a job.