User guide

SYSTEM CONTROL WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 8-19
Format: ASCII (DOS), ASCII (UNIX), EBCDIC. Select/enter the file
format to which you want the console log converted.
Overwrite: Select this option to overwrite the file on the PC UI hard
disk.
Note: The size of the console log is limited to the amount of data
that can be held on one high-density floppy disk, which is 1.44 Mb
(about 60,000 lines).
The system must be idle to start printing of the console log, but once
in progress, other activities may be performed (printing, utilities, and
so on.)
Messages are displayed informing you that the console log will be
overwritten.
Messages are displayed to indicate when the console log is 70%,
80%, 90%, and 100% full.
Problem (TEM)
Selecting the Problem option from the System Control menu
switches the PC UI to TEM mode. In TEM mode, the PC UI mimics
a system controller keyboard/display for the duration of the Problem
task.
The Problem task allows you to get a 6-digit dispatch code from the
system. You will need to report this code when calling for service.
Refer to the “System Control Tasks” section in the
DocuPrint 180
LPS Operator Guide
for a step-by-step description of how to use the
TEM mode Problem task, and for more information on calling for
service.