User guide

FILES WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 3-11
Header button Format: Select this header button to format the floppy diskette. The
first time a floppy diskette is used, it must be formatted and initialized.
Initialize: Select this header button to intialize the floppy diskette.
The first time a floppy diskette is used, it must be formatted and
initialized.
Parameters Copy: Save to Floppy
, Restore to Disk. Select the appropriate
operation.
Disk ID: Default
, DP0, DP1, DP2, DP3.
To save to floppy: Select/enter the rigid disk that contains the file
to be saved. To search all disks for the file, select Default. This
is the same as entering the FLOPPY SAVE command with no
disk ID specified.
To copy from floppy: Select/enter the rigid disk to which you
want the file restored.
Input File ID: Enter the name of the file to save or restore. Masking
is allowed.
Output File ID: Enter the name of the output file if you want it to exist
on the floppy diskette or rigid disk under a different name.
Review: Select this option if you want the system to warn you when
a file from the source device will replace a file of the same name on
the destination device. The warning gives you the option to overwrite
the destination file or cancel the operation.
— Yes overwrites the destination file and proceeds to the next file,
if more than one file is being copied or restored.
— No skips to the next file, if more than one file is being copied or
restored.