Installation Manual

Chapter 4. Design 121
© 2018 Bodno
4.4.10.2.3 4.4.10.2.3 - From Signature Pad
Signature pad is a signature acquisition device, Bodno works essentially
with two kinds, the Topaz or any device that work with WinTab drivers.
The acquisition procedure is simple: click on the 'Signature' button and add the
signature object to the card a list will pop-up to allow you to chose the device in
case of the Topaz, like shown below.
After choosing the device the interface window will show and wait for you to
add the signature to the device like in the pictures below:
The Topaz device also allows you to have templates for the signature frame. The
Wintab driver has a track pressure setting that according with the pressure
made by the pen, makes the line thinner or thicker.
Like any other image object, Bodno allows you to use an existing object, all you
have to do is to click on the object and change the source to 'From Signature
Pad' and starts the procedure of signature acquisition.
Source - Opens a dropdown list with all signature devices that are installed
on your computer.