Installation Manual

Chapter 4. Design 63
© 2018 Bodno
Dot Line: Dots separated by a few pixels.
DashDot Line: Alternate dots and dashes.
DashDotDot LIne: One dash, two dots, one dash, two dots.
The Custom Line is a line that you can define as you wish. By clicking on
the 'advance' button you can set additional parameters like offset and pattern.
Line width: pre-defined options vary between 0.01" to 0.25", but you can
type a customized value.
You can, also, change the color by clicking in one of the colored squares,
acquire any color you have on your screen using the dropper or use the
advance color settings by clicking on the 'More Colors' button.
By clicking on the 'advance' button you have access to settings that allows
you to change the shape of your line. All you have to do is to write the command
on the line like shown below.
SquareCap: A square line end that covers the end point and extends
beyond it by half the line width.
FlatCap: A square line end that does not cover the end point of the line.
RoundCap: A rounded line end.
If you right click on the object a pop-up menu is shown allowing you to: