Product Warranty

ManualsBrandsBody Moods ManualsPlumbing Tools3 Setting Fixed Showerhead, Chrome

Installation Instructions/Warranty Information

1. Remove old

showerhead with

wrench. Clean threads

of shower arm.

For additional assistance

or service call 1-800-531-3342

8076400

3. Position screen washer into

showerhead and attach

showerhead to shower arm. Hand

tighten only (do not over-tighten).

Turn on water and check for leaks.

Cleveland, Ohio 44146

Made in China

www.waxmancpg.com

Waxman

Consumer Products

2. Apply 2 revolutions of

thread tape to threads of

shower arm. Make sure the

tape is applied tightly in a

clockwise direction.

Meets A112.18.1M Requirements

2.5 gpm (9.5 L/min) Max

NOTE:

To change the spray

settings, position hand

on face of showerhead

and rotate by pressing

finger against tab.

8076400 Inst.ai

Limited Lifetime Warranty

This Body Moods

product is warranted to be free from defects in

material and workmanship for limited lifetime. The Waxman

Consumer Group will replace FREE OF CHARGE, under the warranty

conditions, the entire unit or any part (at our option) which proves

defective under normal installation, use and service. This warranty is

limited to defective parts as stated. Additional labor charges and/or

damage incurred in installation, repair or replacement, as well as

incidental and consequential damages, therewith are excluded. Some

states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not

apply to you. Any damage to this product as a result of misuse,

abuse, neglect, accident, improper installation, or any use violating

instructions furnished by us WILL VOID THIS WARRANTY. Problems

associated with hardwater buildup and/or water supply sediment are

not covered under this warranty. To obtain warranty service, send

product to: The Waxman Consumer Group, 24455 Aurora Road,

Bedford Heights, Ohio 44146

Summary of content (1 pages)

PAGE 1
8076400 Inst.ai 8076400 Installation Instructions/Warranty Information NOTE: To change the spray settings, position hand on face of showerhead and rotate by pressing finger against tab. 1. Remove old showerhead with wrench. Clean threads of shower arm. 2. Apply 2 revolutions of thread tape to threads of shower arm. Make sure the tape is applied tightly in a clockwise direction. 3. Position screen washer into showerhead and attach showerhead to shower arm. Hand tighten only (do not over-tighten).