BFPR100 OWNER’S MANUAL
WARNING, SAFETY, & MAINTENANCE THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: WARNING: WARNING! Safety and Maintenance of Cables IMPORTANT: Cable inspection should be performed daily. Replace and damaged or worn cable immediately.
TABLE OF CONTENTS • SAFETY INSTRUCTIONS • PREPARATION ............................ PAGE 4 ... ............ ............................ PAGE 5 • HARDWARE LIST ...... ...... ............................ PAGE 6 • HARDWARE ILLUSTRATION ............................ PAGE 7 • PART LIST/ILLUSTRATION ............................ PAGE 8 • ASSEMBLY INSTRUCTIONS ............................ PAGE 10 • EXPLODED VIEW ...... ...... ............................ PAGE 18 • CONTACT PAGE ...... ...... ....................
IMPORTANT SAFETY INSTRUCTIONS When using exercise equipment, you should always take basic precautions, including the following: Obtaining Service Personal Safety During Assembly Retain this Owner’s Manual for future reference. If you need to order replacement parts please be prepared to provide the following information when contacting us so that we can assist you better. 1. 2. 3. 4.
PREPARATION Assembly Tips Required Tools Installation Requirements Any Questions? Call (800) 556-3113 5
PFPR100 - HARDWARE LIST PART# SIZE DESCRIPTION QUANTITY 1 M10X70mm HEX HEAD BOLT 12 PCS. 2 M10X75mm HEX HEAD BOLT 8 PCS. 3 ø11Xø30X2.5mm FLAT WASHER 40 PCS. 4 M10 NYLON LOCK NUT 20 PCS. Part numbers are required when ordering parts.
HARDWARE ILLUSTRATION Part #1 HEX HEAD BOLT M10X70mm QTY. 12 Part #2 HEX HEAD BOLT M10X75mm QTY. 8 Part #3 FLAT WASHER ø11Xø30X2.5mm QTY. 40 Part #4 NYLON LOCK NUT M10 QTY.
PART LIST/ILLUSTRATION PART A -- FRAME A, 1 PCS PART G -- LIFT OFF, 2 PCS PART B -- FRAME B, 1 PCS PART H -- SAFETY CATCH, 2 PCS PART C -- FRAME C, 2 PCS PART #5 -- FOOT CAP, 4 PCS PART D -- FRAME D, 4 PCS PART #6 -- CLIP-ON SPACER, 2 PCS PART E -- FRAME E, 2 PCS PART #7 -- END CAP, 4 PCS PART F -- CHIN UP BAR, 1 PCS PART #8 -- SAFETY PIN, 4 PCS 8
NOTE 9
STEP 1 Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the last step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on. 1A. Install four Foot Caps (#5) in Frame A (A) and Frame B (B). 1B. Install two Clip-On Spacers (#6) on Frame A (A) and Frame B (B). 1C.
STEP 1 Above shows STEP 1 assembled and completed.
STEP 2 Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware in this step. DO NOT wrench tighten until the last step. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on. 2A. Attach two Frame D (D) to Frame A (A) using: 4 - (#1) M10X70mm Hex Head Bolt 8 - (#3) ø11Xø30X2.5mm Flat Washer 4 - (#4) M10 Nylon Lock Nut 2B.
STEP 2 Above shows STEP 2 assembled and completed.
STEP 3 Be careful to assemble all components in the sequence they are presented. NOTE: Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of STEP 3C. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on. 3A. Install four End Caps (#7) in two Frame E (E). 3B. Attach one ends of two Frame E (E) and Frame C (C) to Frame D (D) using: 4 - (#2) M10X75mm Hex Head Bolt 8 - (#3) ø11Xø30X2.
STEP 3 Above shows STEP 3 assembled and completed.
STEP 4 Be careful to assemble all components in the sequence they are presented. 4A. Insert Safety Catches (H) and Lift Offs (G) into desired positions. 4B. Insert the Safety Pins (#8) at the ends of the Safety Catches (H) and Lift Offs (G). NOTE: Please make sure the Safety Pins (#8) are fully engaged after Safety Catches (H) and Lift Offs (G) are inserted into the Frames.
STEP 4 Above shows STEP 4 assembled and completed.
EXPLODED VIEW DIAGRAM 18
BFPR100 PLEASE WRITE YOUR SERIAL NUMBER IN THE BOXES BELOW S/N # 008274 www.BestFitness.
