Assembly Instructions & EMX1500.
EXM1500 Reference Drawings
Dimensions The room layout diagram below will help you decide the best placement for your EXM1500. The dimensions of the G3S are: Width 3’ 8” X Length 4’3”. The ceiling height requirement for the EXM1500 is 7’. The usage space is: Width 6’3" X Length 6'(The usage space is the overall space needed for operation). The usage space needed for the EXM1500 could be more, depending on the user. Allow enough room for the Low Row Station.
STEP 1 52 Above shows STEP 1 assembled and completed 13 13 42 17 D E 42 53 16 52 45 52 9 42 52 53 4 52 52 52 13 52 52 16 13 42 16 B 52 13 42 52 A 9 42 13 52 3 C 9 46 42 9 46 46 8 46
STEP 2 43 43 53 16 53 104 43 52 16 Above shows STEP 2 assembled and completed 43 13 X 13 52 13 42 104 13 F 42 104 52 104 D 28 E 8 Q 28 18 16 M 52 45 63 18 Q 63 8 104 105 104 A 10
STEP 3 16 Above shows STEP 3 assembled and completed 52 45 W 52 44 29 63 52 52 104 63 16 L L 70 71 73 72 106 19 49 36 B 20 30 1 11 41 F K 29 41 11 12
STEP 4 Above shows STEP 4 assembled and completed E D 52 41 H W 42 52 52 107 13 16 42 41 52 16 45 6 O 13 53 42 52 A 52 53 50 52 42 5 N 5 15 14 15
STEP 5 Above shows STEP 5 assembled and completed 8 S 18 26 M 54 T 55 6 J 47 54 55 54 6 55 47 48 54 55 26 7 48 18 8 H 104 21 50 56 40 21 56 8 18 I 8 M 18 16 104
STEP A5 6 A2 23 A4 A1 A3 Y 16 52 45 ! Y WARNING ! Selector Rod Top Bolt (70) must be threaded a minumum of 1/2" into the Selector Rod (20),and Jam Nut (73) tightened securely against spring Iock washer (72) to ensure proper connection. Check the Jam Nut (73) once a week to make sure it is tight.
STEP 7 Y E D B3 B4 B1 25 B2 3 1/2" Diameter Pulley P R D Y E B3 12 52 45 P 25 B3 52 12 45 R 52 B3 45 20
STEP 8 P C2 24 C1 N H C3 C5 A I C4 52 P 16 45 N H I A 52 53 53 43 22
STEP 9 R 100 22 E 52 53 53 43 G D1 A D2 24
28 67 28 28 68 28
EXM1500.4 KEY# 40 41 42 43 44 45 46 47 48 49 50 52 53 54 55 56 60 63 64 65 70 71 72 73 100 101 102 106 QTY 1 4 13 6 1 9 4 2 2 1 2 34 10 4 4 2 1 4 2 4 1 1 1 1 1 1 1 1 H a r d w a r e (c o n t i n u e d ) PART# DESCRIPTION JHEX.5X3.25PTB JHEX.37X3PTB JHEX.37X2.75PTB JHEX.37X2.5PTB JHEX.37X1.75PTB JHEX.37X1.5PTB JCB.37X2.75PTB JHEX.31X2.75PTB JHEX.31X1.75PTB JRAH.43X1.5PTB JNLN.5 JNLN.37 JWFLT.37 JWFLT.31 JWSW.31 JREC.5 JTSPP3 JAS.31X.31 JBB.87X.75 JBB.75X.5 JSRTB.5 JHEX.37X.87FTB JSLW5 JJN.5 JACN.
EXM1500.4 Hardware List KEY# QTY PART# DESCRIPTION 1 2 3 4 5 6 7 8 9 11 12 13 15 16 17 18 19 20 21 26 28 29 30 36 104 105 107 1 1 1 1 2 3 1 6 4 2 5 12 2 15 1 6 1 1 2 2 6 2 15 1 9 1 1 JPIN4.25 JSCH.18 JCEC22 JCEC22LE JCEC24 JCEC12 JCEC1.75X1.75 JCEC1 JFC22 JRD2.5 JSNAP3 JPS.62X37 JGT5.5 JPP4.25W.75 JPP3.5W.75 JFOAM3.5X8 JTP10 JSR15 JBC.5 JPW3 JREC1.5 JSC1.37X.75 JSP10 JWSW.43 JCEC22LE WEIGHT STACK PIN 4 1/4"X 7/16" STEEL CHINA 23" CONVEX END CAP 2"X2"X2.5T I.
EXM1500.
EXM1500.4 H A R D W A R E (shown in actual size) KEY #40 1/2"X3 1/4" HEX HEAD BOLT QTY.1 KEY #41 M10X75 HEX HEAD BOLT QTY.4 KEY #42 M10X70 HEX HEAD BOLT QTY.13 KEY #43 M10X65 HEX HEAD BOLT QTY.6 KEY #44 M10X45 HEX HEAD BOLT QTY.1 KEY #45 M10X40 HEX HEAD BOLT QTY.
EXM1500.4 H A R D W A R E (shown in actual size) KEY #47 5/16"X2 3/4" HEX HEAD BOLT QTY.2 KEY #48 5/16"X1 3/4" HEX HEAD BOLT QTY.2 KEY #46 M10X70 CARRIAGE BOLTG QTY.4 KEY #49 3/8"X1 1/2" ROUND BOLT QTY.
EXM1500.
43 45 41 X EXPLODED VIEW DIAGRAM EXM-1500.