Specifications

A. Attach two End Caps (13) to the ends of the Low Pulley Frame (AY). Connect Low Pulley

Frame (AY) to the Main Base Frame (A) using:

One 98 (M10 washer)

One 87 (M10 x 16L round allen head)

Attach Foot Brace (AZ) to the open side of Rear Base Frame (D) using:

One 73 (3/8”x 2 3/4” hex head bolt)

Two 94 (3/8” washer)

One 91 (3/8” nylon lock nut)

C. Attach two End Caps (16) and Grip Tape (33) to Foot Brace (AZ) as shown.

D. Attach Pulley (26) to Low Pulley Frame (A

Y) using:

One 76 (3/8”x 1 3/4” hex head bolt)

Two 94 (3/8” washer)

One 91 (3/8” nylon lock nut)

Note:

You should now wr

ench tighten all bolts and nuts in this step.

Do NOT re-tighten any of the pad bolts or pulley bolts.

Be careful to assemble all components

in the sequence they are presented.

STEP

Inch