Instructions / Assembly

STEP

Be careful to assemble all components

in the sequence they are presented.

NOTE:

Wrench tighten ALL hardware at the end of STEP 1A. Some components may be

pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench

tighten to fully go on.

1A. AttachBrackets(C)tobothUprights(A & B)using:

12 - (#1) M10x20mm Button Head Cap Screw

24 - (#2) M10 Flat Washer

12 - (#3) M10 Nylon Lock Nut