Owner`s manual

14
Precision craftsmanship assures Powerline Equipment’s
ability to consistently deliver products of the highest
standards. Our products have been carefully designed to
ensure safe, efcient long term operation.
However, it must be realized that safe use of this equip-
ment requires that owners carefully read and follow the
Powerline Equipment use recommendations, warnings,
and maintenance guidelines in this Owners Manual.
Routine inspection and maintenance is of critical impor-
tance to ensure the maximum safety and performance
of the PGM200X. Powerline Equipment uses the highest
quality materials available, but wear is inevitable. There-
fore, you must carefully inspect your equipment as outlined
in the Maintenance Schedule on the next page.
Be advised that dangerous conditions can arise even
during a warranty period. A warranty does not negate the
owner’s responsibility to thoroughly, carefully and daily
inspect the machine.
Including maintaining the equipment the owner’s responsi-
bility is also to:
l Be sure to always provide adequate
supervision to all end-users.
l Be sure to instruct all end-users of
proper usage.
l Be sure all supervisors and personal
trainers who instruct end-users on
equipment are properly trained and
know the function and importance of
every adjustment and setting.
Also, be sure these trainers provide
proper instruction to end-users on the
fundamentals of strength training.
CABLES:
l While the machine is not in use. Carefully run
your ngers along the cable to feel for
thinning or bulging areas. Replace cables
immediately at the rst sign of damage or
wear. Do not use equipment until damaged
cable has been replaced.
l Visually inspect the cables for fraying,
cracking, peeling or discoloration.
l Check slack in cables and re-adjust cable
tension if needed. See pages 38-39.
l Check that jam nut at Weight Stack is tight.
UPHOLSTERY:
l Wipe down after every workout.
l Periodically take the time to use a mild soap
or a mild vinyl upholstery cleaner. Avoid using
any abrasive cleaner not intended for use on
vinyl.
l Keep sharp or pointed objects out of your
pockets and clear of all upholstery.
NUTS/BOLTS/FASTENERS:
l Periodically inspect all nuts and bolts.
Tighten if needed. If bolts seem to loosen
periodically, use Loctite 242 for a long-term
cure.
l Go through a re-tightening sequence
periodically to ensure that all hardware is
properly tensioned.
GUIDE RODS:
l Wipe clean with a dust free rag. Lubricate
with a Silicon or Teon based lubricant.
ADJUSTMENTS / LOCKING PINS /
TIGHTENING KNOBS:
l Check all pieces for signs of visible wear or
damage.
l Check springs in Snap Links and Pop Pins
for proper tension and alignment.
l If the spring sticks or has lost its rigidity,
replace it immediately.
ANTI-SKID SURFACES:
l Replace if they appear worn or become
slippery.
WARNING INSTRUCTION LABELS:
l Inspect and familiarize yourself with all safety
warnings and other user information on
decals.
W A R N I N G S , S A F E T Y & M A I N T E N A N C E