INSTRUCTION MANUAL LEG PRESS (NEW MODEL) OPTION OF Press PRO QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will guarantee your complete satisfaction through our authorized dealer service centers or our home office customer service department. Please call your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM).
BEFORE YOU BEGIN Congratulations and thank you gor selecting the BODYCRAFT LEG PRESS Ⅱ strength training system. The BODYCRAFT LEG PRESS Ⅱ offers an impressive array of strength training exercises to develop every major muscle group of the body. Whether your goal is cardiovascular fitness, a shapely, toned body or dramatic muscle size and strength, the BODYCRAFT LEG PRESS Ⅱ will help you achieve the specific results you want.
EXPLODED VIEW 88 101 241 207 238 238 230 238 230 225 234 238 216 217 224 211 219 237 209 234 219 238 239 218 223 241 241 236 221 236 241 208 228 236 226 241 231 229 237 238 238 206 233 222 221 230 230 233 234 238 223 228 235 214 239 241 226 238 204 216 236 221 203 241 238 238 238 219 213 233 230 219 213 241 218 220 210 216 238 240 241 221 207 212 238 202 238 239 240 233 230 229 228 238 237 236 238 241 229 238 237 219 215 236 23
PARTS CHART NO. DESCRIPTION 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 233 234 235 236 237 238 239 240 241 242 243R QTY.
STEP 1 1. Attach the Weight Base Connector (207) to the Base Frame (1) using two 3/8" X 3" Hex Bolts (230), four 3/8" Washers (238) and two 3/8" Nylon Nuts (241). Look for the sticker on the Weight Base Connector (207) to determine the correct orientation. 2. Attach the Long Leg Press Connector (205) to the Base Frame (1) using the existing two 3/8" X 3" Hex Head Bolts (88) and two 3/8" Washers (101) used to assemble the Cable Arm Assembly to the Xpress Base Frame. Remove the Nylon Nuts and discard.
STEP 2 1. Attach the Leg Press Main Frame (202) to the Weight Base Connector (207) and the Long Leg Press Connector (205) using four 3/8" X 4" Hex Bolts (229), eight 3/8" Washers (238) and four 3/8" Nylon Nuts (241). 2. Attach the Base Stabilizer (201) to the Leg Press Main Frame (202) using two 1/2" X 3-1/8" Hex Bolts (227), four 1/2" Washers (237) and two 1/2" Nylon Nuts (240). Attach a 45mm X 75mm Rect. Cap (214) to the bottom rear of the Leg Press Main Frame (202). Attach a 50 mm Sq.
STEP 2 234 238 217 224 211 238 234 225 216 237 240 210 226 220 209 216 216 230 236 218 204 238 236 239 206 218 214 238 208 203 229 238 238 228 226 236 234 238 231 238 207 237 215 241 238 212 202 205 240 240 229 238 237 227 215 201 240 -6- 236 239 241 238 241
STEP 3 bolt end LEG PRESS CABLE (243R) metal ball end 1. Screw the threaded end (approximately half way) of the Leg Press Cable (243R) into the Single Pulley Block (27) as shown in Fig. 1. 2. Route the cable up and over the right side pulley in the Top Frame (5) as shown in Fig. 2. Mount the pulley using one 3/8" X 2-3/4" Hex Bolt (89) and one 3/8" Nylon Nut (107). 3. Continue to route the cable down to the pulley on the Base Frame (1) as shown in Fig. 3.
STEP 3 bolt end metal ball end LEG PRESS CABLE (243R) FIG 1 FIG 2 FIG 3 FIG 4 243R 243R 107 107 61 107 27 61 89 91 61 107 61 243R 25 61 91 91 243R FIG 5 FIG 7,9 61 208 233 221 107 91 241 243R 221 FIG 6 FIG 6,7,8,9 FIG 2 221 233 202 243R 241 202 FIG 4 FIG 1 FIG 8 241 202 FIG10 232 221 FIG 8 FIG 9 FIG 3 FIG 10 202 FIG 7 FIG 5 FIG 6 -8-
Assembly is complete! Please take the following steps before using the gym: 1.Make certain all bolts are tightened securely. 2.Make certain all cables are seated into all pulley grooves. A cable rubbingagainst steel will peel the nylon coating, voiding warranty and resulting in a need for replacement. 3.Pre-stretch the cables. Pull on the cables with great force, helping remove any kinks and providing any initial cable stretch. 4.Be aware the cables can loosen and slightly stretch upon initial use. 5.
