Instruction Manual

241
230
230
238
101
88
1
238
205
238
207
1. Attach the Weight Base Connector (207) to the Base Frame (1) using two 3/8" X 3"
Hex Bolts (230), four 3/8" Washers (238) and two 3/8" Nylon Nuts (241). Look for
the sticker on the Weight Base Connector (207) to determine the correct
orientation.
2. Attach the Long Leg Press Connector (205) to the Base Frame (1) using the
existing two 3/8" X 3" Hex Head Bolts (88) and two 3/8" Washers (101) used to
assemble the Cable Arm Assembly to the Xpress Base Frame. Remove the Nylon
Nuts and discard. Thread the bolts into the threaded holes in the Long Leg Press
Connector (205).
STEP 1
-4-
242