Operating instructions

BodyMedia FIT Armband ManualBodyMedia FIT Armband Manual
8 9
Symbol Defi nitions
The Armband is not designed to be used underwater or to come into continuous
contact with water. Do not immerse the Armband in water or any other liquids.
To ensure the Armband is working correctly, they should be cleaned regularly.
Clean the Armband daily after sweating or when either one becomes noticeably
moist or dirty. Failure to keep the Armband clean, or improper cleaning, may
irritate the skin and affect the sensor performance. Do not use solvents, cleaners
or other chemicals to clean the Armband and do not sterilize it. Avoid the use of
lotions or other chemicals on the skin.
Cleaning
To clean the Armband:
1. Gently wipe the side of the Armband that touches the skin with a soft cloth or
towel moistened with a mild soap and water.
2. Wipe with a clean damp cloth to remove any excess soap.
3. Use a dry, soft cloth or towel to completely dry before wearing it.
To clean the Armband strap:
1. Hand wash with mild soap and warm water, rinse, then air dry.
2. Machine drying may affect the performance and lifespan of the strap.
Disinfecting
The Armband may be disinfected occasionally by wiping with soft cloth dampened
with 70% isopropyl alcohol. Allow 5-10 minutes for drying before wearing. Always
disinfect the Armband and replace the Armband strap prior to use by others.
Water Resistance
Care Instructions
Follow operating instructions
CAUTION
Non-Ionizing radiation
The Waste Electrical and Electrical Equipment Regulations indicates
separate collection for electrical and electronic equipment
Type B Applied Part
FCC Logo
Electrical Safety
Armband tested to applicable safety standards by MET Laboratories
Transmit Power Class 8 – Less than 10mW output power
Duty Cycle Class 4 – permitted to operate at 100% duty cycle
Receiver Class 3 – Standard reliable SRD communication media