Manual & Quick Start Guide Wireless LINK Armband Model AB185
Contents Purpose of the System........................................................................... 2 Cautions.................................................................................................. 3 Get Started.............................................................................................. 5 Your Armband......................................................................................... 5 Wearing Your Armband...............................................................
Purpose of the System Cautions INTENDED USE Always consult a physician before starting any new diet or exercise program. This system is not to be used for diagnostic purposes and is not intended to be a substitute for the medical advice or supervision of your personal physician. The weight management system records, analyzes and reports physiological parameters.
Cautions (continued) If the Armband is dropped, ensure that it is working properly and not physically damaged before relying on readings. The equipment of the system should not be used adjacent to or stacked with other equipment. If such a setup is necessary, all equipment should be checked to verify correct operation. Get Started Please refer to the “Get Started” instructions on our homepage to begin using the system. It only takes a few minutes to get set up and moving toward a healthier lifestyle.
The Armband should be worn no more than 23 hours a day. Wearing Your Armband Replace the strap if it has lost its elasticity. Information on obtaining replacement parts can be found at www.bodymedia.com/shop 23 HR Wear on the back of your left upper arm (triceps); be sure your upper left arm and the Armband are clean, dry, and free of lotion or oil. Do not secure the strap too tightly. It should be snug, but you should be able to fit two fingers beneath the strap.
Removing the Sensor from the Strap PR ESS Reattaching the Sensor Locate the USB port on the Sensor, then align the port with the indentations on the side of the strap. Squeeze the Sensor into the strap until it snaps into place. Press down on the right side of the Sensor until it separates from the strap. Charging the Battery Checking Battery and Memory Status Charge the battery by connecting the Sensor to your computer with the USB cable.
Using Bluetooth® Wireless Technology Troubleshooting Once you have registered the Armband to your account, connect to a smartphone with Bluetooth using ‘pairing.’ For the latest information and instructions, please visit: For troubleshooting information and additional resources, please refer to www.bodymedia.com/support bodymedia.com/Bluetooth-iPhone bodymedia.com/Bluetooth-Android 1. PUT THE ARMBAND IN PAIRING MODE Hold down the Armband’s status button for 5 seconds.
Symbol Definitions Consult instructions for use Product Specifications Sensors: FCC Logo • Accelerometer (3-axis) • Heat Flux • Skin Temperature CAUTION Serial Number • Galvanic Skin Response (GSR) Materials: Non-ionizing radiation The Waste Electrical and Electrical Equipment Regulations indicates separate collection for electrical and electronic equipment Type B Applied Part Bluetooth® Wireless Technology • Sensor: ABS, polycarbonate, thermoplastic polyurethane, 304 grade stainless steel • Adjus
Warranty Unless otherwise set forth in a separate limited warranty description included with the BodyMedia Hardware (including Armband, Display with Clip and Watch strap), BodyMedia warrants that BodyMedia Hardware is free of defects in materials and workmanship under normal use and service (“Limited Warranty”) for 1 year from the date the product is purchased by the original retail purchaser (the “Limited Warranty Period”).
User Environment Guidance and Manufacturer’s Declaration - Immunity 2.5m 1.5m 1.5m 1.5m Computer and Wireless Communicator Diagram not to scale. Guidance and Manufacturer’s Declaration - Emissions The Armband is intended for use in the electromagnetic environment specified below. The customer or user of the Armband should ensure that it is used in such an environment.
User Environment (continued) Guidance and Manufacturer’s Declaration - Emissions Recommended Separation Distances for the Product The Armband is intended for use in the electromagnetic environment specified below. The customer or user of the Armband should ensure that it is used in such an environment. The Armband is intended for use in the electromagnetic environment specified below.
Regulatory Statement FCC Declaration of Conformity – We, BodyMedia, Inc., One Gateway Center, 420 Fort Duquesne Boulevard, Suite 1900, Pittsburgh, PA 15222, declare under our sole responsibility that the products, BodyMedia, Inc. and BodyMedia® Armband (Model AB185) comply with part 15 of the FCC rules.
Copyright, Patent & Trademark Notice The products and services which include the software, firmware, algorithms, processes, and methods of BodyMedia FIT™, SenseWear® applications, and other applicable BodyMedia applications as well, all devices and components used therewith including the Armband, Display, and Wireless Communicator, are covered by one or more of the following patents: United States Patent Nos.
BodyMedia, Inc. One Gateway Center 420 Fort Duquesne Blvd. Suite 1900 Pittsburgh, PA 15222 USA www.bodymedia.com 100706_REV6 © Copyright 2012 BodyMedia, Inc.