User's Manual

3. Click the Data Channels tab. If you change the settings, make sure to apply them
to the Armband currently attached via USB, before saving.
4. Click Save Settings then name and store your file.
SenseWear Maintenance
The InnerView
TM
Research Software enables you to perform maintenance procedures on
the SenseWear
®
Pro
2
Armband. In general, you should never plug the USB cable into the
Armband while it is on your or a subject's arm and only use these commands if instructed
to do so by the BodyMedia
®
technical support team.
Clearing Data
To clear data from the Armband, attach the USB cable to the Armband and select
Clear Data from the SenseWear Maintenance Menu. This procedure will clear all
collected data, but will not change any of the Body Parameters. This command is
useful for situations where you want to clear the data from the Armband, but
preserve the wearer's settings.
Clearing Data and Body Parameters
To clear data and reset body parameters on the Armband, attach the USB cable to
the Armband and select Clear Data & Body Parameters from the SenseWear
Maintenance Menu. This procedure will clear all collected data, and reset all of
the body parameter values to null. This command is useful for situations where
you want to get the Armband ready for a different wearer.
Clearing Data and Body Parameters and Channels
To completely reset the Armband to its original factory settings, attach the USB
cable to the Armband and select Clear Data, Body Parameters & Reset Channels
from the SenseWear Maintenance Menu. This procedure will clear all collected
data, reset all of the body parameter values to null, and reset all of the channels
and sampling rates to their original factory settings. This command is useful for
situations where you want to quickly reset the Armband and start from scratch.
Rebooting the Armband
To reboot the firmware on the Armband, choose Reboot SenseWear from the
SenseWear Maintenance Menu. This command restarts the firmware on the
Armband. No data will be lost when performing this procedure. This command is
useful in the event that your Armband firmware crashes.
Handling
Though the Armband was designed for wearability and long-term use, it is a
sensitive monitoring device. Rough handling can break internal components.
Never drop or shock the Armband and always store it in a safe place when not in
use.