User's Manual

Care and maintenance
Handling
Though the SenseWear
®
Pro
2
Armband was designed for wearability and long-term use, it
is a sensitive monitoring device. Rough handling can break internal components. Never
drop or shock the Armband and always store it in a safe place when not in use.
Avoid exposing the Armband to extreme temperatures, direct sunlight, moisture, sand,
dust, or mechanical shock.
To prevent possible damage to the cable, grasp the plug, not the cable, when
disconnecting the USB. Replace the cable if it becomes frayed.
The Armband is splash resistant. It is not designed to be used underwater or to come in
continuous contact with water. To prevent a shock hazard, never use the Armband in
water environments (e.g., in the shower, swimming pool, or rain).
Remove the battery if the Armband is not being used for an extended period of time.
Please note that removing the battery will cause any data stored on the Armband to be
deleted.
Maintenance
Do not attempt to open the Armband yourself. It contains no user-serviceable parts. Refer
all servicing to qualified Service Personnel. Opening the Armband yourself will void the
warranty.
Cleaning
Always clean and dry the Armband after vigorous sweating activities or when it becomes
noticeably moist or dirty. Failure to keep the Armband clean, or improper cleaning, may
irritate the skin and affect the sensor performance.
Moisten a soft cloth or towel with mild disinfectant soap and water. Wipe and dry the
skin-touching side of the Armband. Never use solvents to clean the Armband, only for
disinfecting (see below). The adjustable strap should be hand-washed with mild soap and
warm water, then air-dried. Machine drying may affect the performance and lifespan of
the strap.
Disinfecting
Wipe back of Armband with soft dampened cloth with 70% isopropyl alcohol between
users. DO NOT STERILIZE THIS UNIT.