Operation Manual

7
1
2
3
4
STEP 4
1. Release φ8 Washers (pt.C-5), φ8 Flat washers (pt.C-6) and M8*16 Screws (pt.C-7) form Main
frame (pt.D).
2. Take the Front post cover (pt.D-16) pass through Front post (pt.C).
3. Connect the Lower sensor wire (pt.D-14) and the Upper sensor wire (pt.C-1), Slide the
Front Post (pt. C) into the Front Post Housing, and then fix with two φ8 Washers (pt.C-5),
two φ8 Flat washers (pt.C-6) and four M8*16 Screws (pt.C-7).
4. Put down the Front post cover (pt.D-16) to the main frame (pt.D) and the fix with M5*14
screw (pt.C-3).