Owner`s manual

A
SSEMBLY INSTRUCTIONS
Step 1: T
ake the machine from the package, put on the level floor. Use 4pcs M8*45 and
4pcs of M8*15 screws to fix the stand post (Left and right) to the base frame (before
assembling the left stand post, please connect the signal wire which is between the base
frame and stand post).
Step 2: Put the computer on the upright post, and then securely connect the signal wire
between the computer and the upright post. Afterwards, use the M8*10 to fix the
computer onto the upright post.
7
Owner’s Manual