Instructions / Assembly

Safety Netting Installation

Method

For protection on open sides of buildings

1. UV-Treated Cable Ties

2. Aircraft Cable OSHA Required

3. Toeboard Fasten to Floor by Furring Strips or Large Head Nails or Power Actuated

Fasteners

4. 42” or 60” Depending on Local Laws

5. 21” or 30” Depending on Local Laws

The suggested installation methods depicted and described above may not be appropriate in all

circumstances as conditions that could affect the safe installation of the material may vary from site to

site. Therefore, this suggested installation is provided only as a general guideline as to one typical

installation method that may or may not be appropriate for a particular application. Purchaser/user is

solely responsible for the proper installation as may be appropriate or inspect the installation and

submit and questions regarding the particular application of the product to a qualified engineer. Boen

Products disclaims any responsibility for the results of any inappropriate or inadequate installation.

PAGE 1
Safety Netting Installation Method For protection on open sides of buildings 1. UV-Treated Cable Ties 2. Aircraft Cable OSHA Required 3. Toeboard Fasten to Floor by Furring Strips or Large Head Nails or Power Actuated Fasteners 4. 42” or 60” Depending on Local Laws 5. 21” or 30” Depending on Local Laws The suggested installation methods depicted and described above may not be appropriate in all circumstances as conditions that could affect the safe installation of the material may vary from site to site.