Installation Guide

ManualsBrandsBoerboel ManualsFencingWhite Aluminum Standard-Duty Drive Gate Drop Rod

PLEASE READ OWNER'S MANUAL COMPLETELY

BEFORE INSTALLING YOUR HINGE KIT.

5058EPN V1 12/13

For use with Vinyl Fencing.

Standard

Drop Rod

Installation Instructions

To register your product, please visit: www.boerboelgatesystems.com

Owner's Manual

Version

1.0

Summary of content (4 pages)

PAGE 1
Standard Drop Rod Installation Instructions PLEASE READ OWNER'S MANUAL COMPLETELY BEFORE INSTALLING YOUR HINGE KIT. For use with Vinyl Fencing. To register your product, please visit: www.boerboelgatesystems.com 5058EPN V1 12/13 Owner's Manual Version 1.
PAGE 2
Thank you for choosing the Boerboel Drive Gate Drop Rod. Please read the instructions completely before assembling. Retain manual and your dated sales slip for future reference or warranty claims. Material Checklist:  Safety Glasses  Drill  Level  Pencil  Tape Measure  Phillips Head Screw Driver ATTENTION: Before you assemble: PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS. DO NOT ATTEMPT TO ASSEMBLE THE KIT IF PARTS ARE MISSING OR DAMAGED.
PAGE 3
DIY Framed Gate Installation Left Panel 1.) Right Panel Right Panel B D 35 in. 5.) C 35 in. On the right hand side of the gate, hold up the latch catch (E) and close the gate to align the latch with the catch mechanism. Mark the holes. Pre-drill with 1⁄8" bit, then mount the latch catch (E) using the provided screws. Install the second rod guide (C) on the gate above the bottom rail with provided screws. C 4.) Attach the two pieces of the drop rod (A) together.
PAGE 4
Limited Lifetime Warranty Subject to the conditions and limitations set out below, Barrette Outdoor Living warrants that for so long as the original purchaser of a product manufactured by Barrette Outdoor Living owns that Boerboel Manual Hardware (the Product) it will be free from all defects due to faulty design, materials or workmanship.