Installation Guide

PLEASE READ OWNER'S MANUAL COMPLETELY

BEFORE INSTALLING YOUR HINGE KIT.

5050EPN V1 11/13

For use with Vinyl, Aluminum and Wood.

Gate Stop

Installation Instructions

To register your product, please visit: www.boerboelgatesystems.com

Owner’s Manual

Version

1.0

™

Thank you for choosing the Boerboel Gate Stop. Please

read the instructions completely before assembling. Retain

manual and your dated sales slip for future reference or

warranty claims.

ATTENTION:

Before you assemble:

PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS.

DO NOT ATTEMPT TO ASSEMBLE THE KIT IF PARTS ARE MISSING OR DAMAGED.

Please do not return the product to the store, for assistance or replacement parts call:

1-800-336-2383

Material Checklist:

Safety Glasses

Level

Tape Measure



Drill and driver/driver bits

Pencil

Gate Stop

(3)

1" Phillips self

drilling screws

Kit Contents:

Installation

1.) Attach the gate stop to the inside of

your gate upright (facing the post)

then mark, pre-drill and attach using

the three screws.

Back of Gate

PAGE 1
5050EPN V1 11/13 Gate Stop Owner’s Manual Installation Instructions ™ Version PLEASE READ OWNER'S MANUAL COMPLETELY BEFORE INSTALLING YOUR HINGE KIT. 1.0 For use with Vinyl, Aluminum and Wood. Thank you for choosing the Boerboel Gate Stop. Please read the instructions completely before assembling. Retain manual and your dated sales slip for future reference or warranty claims.
PAGE 2
Limited Lifetime Warranty Subject to the conditions and limitations set out below, Barrette Outdoor Living warrants that for so long as the original purchaser of a product manufactured by Barrette Outdoor Living owns that Boerboel Manual Hardware (the Product) it will be free from all defects due to faulty design, materials or workmanship.