Installation Guide

PLEASE READ OWNER'S MANUAL COMPLETELY
BEFORE INSTALLING YOUR HINGE KIT.
5026EPN V1 12/13
For use with Vinyl or Wood Gates.
Heavy Duty
Drop Rod
Installation Instructions
To register your product, please visit: www.boerboelgatesystems.com
Version
1.0
Thank you for choosing the Boerboel Heavy Duty Drop Rod.
Please read the instructions completely before assembling.
Retain manual and your dated sales slip for future reference
or warranty claims.
ATTENTION:
Before you assemble:
PLEASE TAKE A COMPLETE INVENTORY OF ALL PARTS USING THE KIT CONTENTS.
DO NOT ATTEMPT TO ASSEMBLE THE KIT IF PARTS ARE MISSING OR DAMAGED.
Please do not return the product to the store, for assistance or replacement parts call:
1-800-336-2383
Material Checklist:
Safety Glasses
Level
Tape Measure
Drill and driver/driver bits
Pencil
Heavy Duty Drop Rod
(2) Drop rod brackets
(8) 1
1
1
1
4
4
" self drilling
Phillips screws
Kit Contents:
Installation
1.) Mount the lower drop rod bracket two
inches from the bottom edge of the gate
with the 4 supplied screws.
2.) Thread the rod through the upper bracket
then through the installed lower bracket
into the receiver hole (your choice: dug,
excavated or drilled)
3.) With the tabs in the locked position, attach
the top bracket to the gate so that the drop
rod does not drag when gate is opened or
closed.
The drop rod can be secured with a
padlock.
IMPORTANT SAFETY NOTICE PLEASE READ:
Follow all gate and gate hardware installation and maintenance instructions. Follow
all applicable building codes for your gate and gate hardware installation. THIS
PRODUCT MUST NOT BE USED TO RESTRICT ACCESS TO SWIMMING POOLS OR
ANY OTHER HAZARD.
Receiver Hole
Closed
Open
Receiver Hole

Summary of content (2 pages)