Data Sheet

Driver Complement:
One Apogee 10"(254mm) dual voice coil permanent magnet
cone-type driver
Input Connectors:
Barrier strip, screw type #8
Compatible Processors:
AF -110 Controller or DLC24
Recommended Crossover:
LF cutoff 40 Hz, HF cutoff 200 Hz, 12 to 48 dB per octave
Handles:
Two handles – one top, one bottom – designed as an integral part of
the enclosure (no moving parts)
Grille:
Powder-coated, perforated steel
Rigging Hardware:
Yoke: Two rigging points, one on each side, to accept a yoke;
points are backed with 16-gauge steel and can be type 3/8" – 16 or
M10 thread
OmniMount
®
: Bolt pattern on back panel accepts 60.0 series mount
Finish:
Textured high-strength black or white epoxy paint; other colors
optional
Enclosure Type:
Rectangular, band-pass bass
Cabinet Construction:
Multi-ply hardwood with stainless steel fasteners
Options/Accessories:
• AF Controller (model specific Crossover, EQ, and limiting)
• "SX" weather treatment for harsh environments
• Assorted rigging components
• Cables
Subwoofer System
Engineering Data:
Description:
Format:
Band-pass
Dispersion:
Omni-directional
Frequency Response (1m on axis):
48 Hz to 145 kHz ± 3 dB
Max. SPL (@1m):
114 dB cont./120 dB peak
PTML (peak transient mechanical limit):
131 dB
Sensitivity (1W @ 1m):
93 dB
Nominal Impedance:
8 ohms per voice coil
Max. Power Handling:
150W cont./600W peak
Dimensions:
12.7"(232mm) W x 18.7"(475mm) H x
16.25"(413mm) D
Weight:
40 lb. (18 kg)
The AF -110 is an extremely compact yet
powerful dual voice coil, long excursion
subwoofer capable of extending the range of
any small loudspeaker. The AF -110 is small
enough to fit just about anywhere allowing it to
easily integrate into interiors. For smaller
facilities, the dual voice coils allow a single unit
to produce left and right low frequency signals.
AF -110