Data Sheet

Models BP12DSP and BP15DSP Bogen Pro Loudspeakers are portable, 2-way self-powered loud-
speakers capable of high sound pressure levels. Their built-in amplifiers and the quality of their
transducers offer better performance than any loudspeaker in their range. A specially designed multi-
angle cabinet enclosure allows these speakers to be positioned for use in a variety of settings. The low-
frequency selector allows the speakers to be quickly configured for any environment, while the direct
microphone input allows easy set up for voice reinforcement applications.
• Neodymium LF drivers: 12” on BP12DSP,
15” on BP15DSP
• 1-3/4” Voice coil compression driver
• 350-watt Bi-amp configuration: Low 300W RMS
(Class D amplifier), High 50W RMS
(Class AB amplifier)
• DSP processing
• Combo XLR / 1/4” TRS MIC/LINE Input
• Input sensitivity switch for LINE or MIC
• Link out on XLRM connector
• LF EQ Presets (cut/hi-pass filter, flat/no effect,
boost/LF shelf)
• Signal/Clip and Power indicator LEDʼs
• Main volume control
• Lightweight
• High-efficiency
• Horn coverage: 90 x 45 degrees
• Wide frequency response
• Precision tuned by Apogee Sound International
Engineering in the U.S.A.
• Multi-angle, multi-purpose polyethylene cabinet
• Pole cup for tripod mounting
• 6 Rigging points
• Listed to UL Standard 60065 for U.S. and Canada
• FCC Part 15 Class B Compliant
Features
Description
Specifications subject to change without notice.
© 2013 Bogen Communications, Inc.
54-8023-65A 1312
Bogen Pro
Powered Loudspeakers
Models BP12DSP, BP15DSP
Architect
and Engineer
Specifications
The speakers shall be Bogen Pro Loudspeakers,
Model BP12DSP or BP15DSP. The speakers shall
be 2-way powered loudspeakers capable of high
sound pressure levels, and processed via DSP.
The speakers shall offer high-efficiency drivers –
the low-frequency driver shall be ____ (12” on the
BP12DSP; or 15” on the BP15DSP) neodymium,
with a 2.5” voice coil; the high-frequency driver
shall be a 1” exit compression driver with a 1.75”
voice coil. The speakers shall have a 350-watt
bi-amp configuration – Low 300W RMS (Class D
amplifier) and High 50W RMS (Class AB amplifier).
A MIC/LINE Input shall be available, with an Input
Sensitivity switch for LINE or MIC. There shall be a
link out via an XLRM connector. Several LF EQ
presets shall be available, including cut/hi-pass fil-
ter, flat/no effect, and boost/LF shelf).
The speakers shall have a main volume control,
as well as a Signal/Clip indicator. The speakers
shall be tuned by Apogee Sound International
Engineering in the United States.
The speakers shall have multi-angle polyethylene
cabinets to allow use in a variety of applications.
They shall be lightweight and portable, with a
built-in pole cup for tripod mounting. They shall
have six (6) rigging points.
They shall measure _____________________
(15-1/2” W x 26-1/8” H x 14-1/4” D for the
BP12DSP; or 15-1/2” W x 26-1/8” H x 15-7/8” D
for the BP15DSP) and weigh _______________
(38.5 for the BP12DSP; or 40.5 for the BP15DSP)
pounds.
BP12DSP
BP15DSP