User's Manual
Speaker Installation (cont’d)
8. Make the electrical connections
using Category 5 or higher
Ethernet cable with an RJ-45
connector (Figure 4). The power
is supplied by PoE using an
802.3af compliant network
switch or PoE injector.
9. Place the entire assembled
ceiling tile back into the ceiling
grid.
NOTE: Refer to the Nyquist Gen-2 VoIP Speakers Conguration Manual or
the System Administrator Manual for detailed instructions on how to con-
gure these speakers.
Using the Reset Button
The Reset button (Figure 5) allows you to either reboot the VoIP speaker
or to reset the appliance’s conguration settings to the factory default
settings. For more information about resetting conguration settings,
refer to the Nyquist Gen-2 VoIP Speakers Conguration Manual.
Figure 4
Figure 5
Additional Accessories
The Nyquist Gen 2 VoIP Ceiling Speaker can be used with the Nyquist
Digital Call Switch NQ-E7020. Refer to the Nyquist Digital Call Switch
NQ-E7020 Quick Start Guide.