User's Manual
11
5. Connecting
1.1 UDR8011 Receiver
The XLR balanced output jack or 1/4” unbalanced output jack can
be used to connect the audio output to a mixer or an amplier.
1. Connect the audio output of receiver to mixer or amplier
2.1. Connect the AC/DC adapter:
Check that the DC current and voltage ratings of the adapter match
the label on the unit. Connect the DC terminal to the DC input port
on the unit and the AC end to an AC outlet.
2.2. Set the parameters:
Turn the power on and set the parameters of the receiver according
to the instructions (section 6.1).
CAUTION! Secure the power cable on the strain relief fastening hook
to prevent the power cable from accidental removal.
2. Connect the Power
5-1 How to Connect the UDR8011 Receiver
AC/DC Adapter
STEP 1
Wall
Outlet
Mixer/Amplifier
STEP 2
UDR
8011
Strain Relief:
Power cable
fastening hook
UDR8011
BOTTOM
VIEW
AC/DC Adapter Cable