User's Manual

1. UHT8011 Hand Held Transmitter

5-2 Transmitter Installation

1. Unscrew the outer tube of the transmitter (Fig. 1).

2. Open panel door and place 2 AA batteries in the battery holder,

ensuring they are in the correct polarities (Fig. 2).

3. Screw the outer tube on (Fig. 3).

4. To turn the unit on:

a. Push the Power button to turn the unit on (Fig. 4a), or

b. Push the Mute switch up to turn the unit on (Fig. 4b).

5. Set the transmitter parameters according to the instructions

(section 6-2).

1. Slide the battery holder cover downwards (Fig. 1).

2. Place 2 AA batteries in the battery holder ensuring they are in the

correct polarities (Fig. 2).

3. Slide the battery holder cover upwards to close (Fig. 3)

4. Insert the microphone 4-pin mini XLR into the body pack jack (Fig. 4).

5. Push the Power button to turn the unit on (Fig. 5).

6. Set the transmitter parameters according to the instructions

(section 6-2).

2. UBP8011 Body Pack Transmitter

Fig. 1

Fig. 2

Fig. 3

Fig. 3 Fig. 4 Fig. 5

Fig. 4a Fig. 4b

Fig. 1

Fig. 2

Fig. 3

Fig. 3 Fig. 4 Fig. 5

Fig. 4a Fig. 4b