User's Manual

14
When TX transmitter is selected:
◎ ATT: Microphone Audio Input Attenuation
At oFF
No attenuation.
At on
20 dB attenuation at audio
input).
The function is activated with 20 dB
of audio input attenuation.
◎ GAIN: Microphone Input Sensitivity
High
Sensitivity
Default
Low
Sensitivity
GAIN: +15 dB
GAIN: +12 dB
GAIN: +9 dB
GAIN: +6 dB
GAIN: +3 dB
GAIN: 0 dB
GAIN: -3 dB
GAIN: -6 dB
GAIN: -9 dB
GAIN: -12 dB
GAIN: -15 dB
Shows the microphone input sensitivity
is now at 0 dB (default setting).
◎ ATOF: Automatic Turn Off Timer
AO OF
This function is deactivated.
AO 1
1 minute shutdown.
AO 10
10 minute shutdown.
AO 30
30 minute shutdown.
This function is deactivated.
When active, the transmitter will
shutdown only when in MUTE mode.
◎ RFP: RF Transmitter Power
rF Lo 10mW
rF Hi 50mW
The transmitter comes with 2 stages of RF
power output (as per local regulations).
Shows that the RF Output is LO (10mW)
The default setting is 10 minutes.
rC-FrE
Only frequency setting will be
synchronized
rC-ALL
All settings will be synchronized
◎ RC: (Resync Conguration)
The default setting is rC-FrE.
Only frequency setting will be
synchronized during pairing.