Installation Manual

5
Wiring
Phone Connection
The ADP1 comes with an RJ11 wired to the pluggable terminal block. Connect the
ADP1 to the phone systemʼs analog station line programmed for ring down operation
using the RJ11 or directly to the screw terminals depending on how the lines are
terminated. The connections to the terminal block are not polarity sensitive.
Surge Protection
To increase surge protection, connect a protective Earth Ground to the spare lug
provided. A ring lug is provided to which the protective ground lead is crimped.
Reassemble the lug to post as shown.
54-2098-01C_ADP1 Manual_54-2098-01A.qxd 3/20/15 2:30 PM Page 5