Spec Sheet
Rated Output: 1 watt
Frequency Response: 10Hz to 10kHz
Distortion at Rated Output: 1.5% max.
Signal to Noise Ratio: -70dB
Input Impedance: 1000 ohms
Input sensitivity: 113mV ±4dB
Sound Pressure Level: 92dB @ four feet on axis with 1 watt input at 1000Hz
Dispersion: 90°
Size: 8” cone
Volume Control: Outgoing level adjust
Supply Voltage Range: 24VDC ±10%
Nominal Operating Current: 50mA
Idle Current: 20mA
Shipping Weight: 2 lbs.(.91 kg)
Optional Assembled Versions:
Model ASWB-
1
— AS-1 in a 9-
1
/
2
”W x 11-
5
/
8
”H x 6-
5
/
8
”D
(top),4-
1
/
8
”D (base) (24.1 x 29.5 x 16.8 x 10.5) simulated
wall baffle;shipping weight 8 lbs.(3.62 kg)
Model ASWG-
1
— AS-1 mounted on a 12-
5
/
8
” (32 cm)
diameter steel ceiling grille, finished in white semi-gloss
enamel;shipping weight 3 lbs.(1.36 kg)
Technical
Specifications
The loudspeaker shall be a Bogen Model
________ (Insert AS-1, ASWB-1, or ASWG-1)
amplified loudspeaker, or equivalent, utilizing an
eight-inch cone-type loudspeaker and a built-in
amplifier with volume control, providing a fre-
quency response from 100Hz to 10kHz,with not
more than 1.5% distortion at rated output.
Sensitivity shall be 113mV,±4dB.Input impedance
shall be 1000 ohms. The loudspeaker shall be
powered by a suitable 24V DC power supply and
shall consume 50mA at nominal output. Rated
power output shall be one watt into 45 ohms.
Sound pressure level,measured four feet on axis
with one watt input at 1000Hz shall be at least
92dB.
(Use for Model ASWB-1) The loudspeaker
shall be assembled in a wall baffle for surface
mounting (with slight downward sound disper-
sion),constructed of
3
/
8
” particle board in simulat-
ed walnut,with a black grille cloth. The unit shall
measure 9-
1
/
2
”W x 11-
5
/
8
”H x 6-
5
/
8
”D (top),4-
1
/
8
”D
(base). The shipping weight shall be eight pounds.
(Use for Model ASWG-1) The loudspeaker
shall be assembled on a 12-
5
/
8
” diameter steel ceil-
ing grille, finished in white semi-gloss enamel,for
recessed installation. The shipping weight shall be
three pounds.
Architects
and Engineers
Specifications
50 Spring Street,P.O.Box 575,Ramsey,New Jersey 07446
(201) 934-8500 FAX: (201) 934-9832
COMMUNICATIONS, INC.