Datasheet

Bogen's Self-Amplified Metal Box Speakers are available
in two models, AMBSQ1 and AMBSL1, and are suitable for
both ceiling and wall mounting.
Product Features:
• Rugged all-steel, surface-mounted, off-white painted enclosure
• Speaker front is available flat (AMBSQ1) or angled downward
by 12.5 degrees for wall mounting (AMBSL1)
• Full-range 8" cone loudspeaker for excellent intelligibility
• Built-in volume control with detachable knob
• Self-contained 1-watt amplifier
• Wiremold
®
knockouts
• Mounting hardware included
www.bogen.com
24
SELF-AMPLIFIED SYSTEMS
SELF-AMPLIFIED SURFACE-MOUNT SPEAKERS
Easy Install
®
Ceiling Speakers
ASM1
Metal Box Speakers
AMBSQ1,
AMBSL1
Refer to Speaker
Quantity Chart
on page 23.
Refer to Speaker Quantity
Chart on pg. 23 for ceiling
mount or chart on pg. 25
for wall mount.
125 Hz - 15 kHz 90 3" from tile surface 9-1/2" diameter 2 lb.
Frequency Maximum Product
Response dBspl Depth Dimensions Weight
AMBSQ1
Shown with
Volume Knob
attached
Detachable
Volume Knob
AMBSL1
Shown with Volume
Knob detached
Dimensions
11-5/8" W x 11-3/8" H x 5-3/8" D
11-5/8" W x 11-3/8" H x 3-1/8"D
11-5/8" W x 11-5/8" H x 4-1/4" D
Front Panel
Design
Slant/Angle
Square/Flat
AMBSL1
AMBSQ1
Product
Weight
9 lb.
9 lb.
(Top Dimension)
(Bottom Dimension)
Models
Accessories
SMTB
Tile Bridge
Maximum
dBspl
92
92
Frequency
Response
110 Hz -15 kHz
110 Hz -15 kHz
Product Features:
• Installs in less than a minute
• No-tool installation eliminates
need to cut ceiling tiles
• Built-in 1-watt amplifier
• Direct and reflected sound paths
create wide dispersion angle
• Lightweight and durable, off-white
plastic shell with paintable finish
• Contemporary, low-profile design
• O-ring seal prevents whistling
and ensures smoother sound
without peaks
• Front-mounted volume control
• Complies with NFPA National
Code 160b for installation in
plenums and other air
handling spaces
• Complies with UL-2043
Bogen’s Self-Amplified Easy Install Speakers can be installed in a
ceiling tile in less than a minute in any drop ceiling with standard
ceiling tiles. Installation is a simple, three-step process that requires
no tools. Simply pierce the ceiling tile with the specially-designed
studs, use wing nuts to secure the speaker to the ceiling, and fasten
wire nuts to make the 24V DC power and audio connections.
Wiremold
®
is a registered
trademark of Wiremold/Legrand.
SIDE
VIEW
AMBSQ1 AMBSL1