Data Sheet

The Bogen Classic Series Models C35, C60, and C100 are public address mixer amplifiers that

provide mixing of microphones, telephone, and auxiliary sources.

Output screw terminals are provided for 4-ohm (direct) and 8-ohm (C35 & C60 models only), 16-ohm,

25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape

recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory

transformer (Model WMT1A) is used.

Classic Series

Public Address

Amplifiers

Models

C35, C60 & C100

• 3 models: 35, 60, and 100 watts

• 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL,

plus 1 selectable MIC or AUX

• Each input controlled by an independent

volume control

• Treble and bass controls

• AUX muting by external contact closure for

push-to-talk microphones

• TEL input for telephone paging applications

• TEL input voice-activated (VOX) mute over

AUX input

• Variable threshold for TEL input voice-

activated AUX mute

• Outputs for 4-ohm (direct), 8-ohm (C35 & C60

models only), and 16-ohm, 25V and 70V

speaker systems (transformer coupled)

• Output jack to connect a recording device

or booster amplifier

• Output jack to connect a general-purpose

600-ohm matching transformer (model WMT1A)

• Thermal protection and electronic shutdown

• Rack mountable with accessory mounting kit

(model RPK50)

• Listed to UL Standard 60065 for U.S. and Canada

Features

Description

Specifications subject to change without notice.

54-7853-01D 1109

PAGE 1
Classic Series Public Address Amplifiers Models C35, C60 & C100 Description The Bogen Classic Series Models C35, C60, and C100 are public address mixer amplifiers that provide mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm (direct) and 8-ohm (C35 & C60 models only), 16-ohm, 25V and 70V (transformer-coupled) speaker systems.
PAGE 2
Technical Specifications Power Output (RMS): Rated Frequency Response & Distortion: Transformer† 4-Ohm Direct Output Hum and Noise: MIC AUX TEL Input Sensitivity: MIC Lo-Z Balanced AUX TEL Outputs: Architect and Engineer Specifications C35 35W C60 60W C100 100W 70 Hz - 16 kHz (± 2 dB) @ 1% max. 20 Hz - 20 kHz (± 1 dB) @ 0.5% max.