CC Series Amplifiers Model CC4052, CC4052m, & CC4062MBT Installation and Use Manual ©2013 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice.
NOTICE: Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, information is subject to change. WARNING: To reduce the risk of Fire or Electric Shock, Do Not Expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus. WARNING: Only connect unit to AC mains outlet providing protective earthing connection.
Contents Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Output Connections . . . . . . . . . . . . . .
Panel Descriptions Front Panel 1 2 MP3 USB OOO 1 BASS 0 O2:15 -12 INPUT 1 INPUT 2 INPUT 3 INPUT 4 0 0 0 0 BLUETOOTH PEA PEAK K 10 10 10 TREBLE 0 +12 -12 +12 SIGNAL POWER 10 POWER 4 3 5 6 7 1. Media Player (Models CC4052m & CC4062MBT Only) Play MP3 files from either an SD card or a USB memory stick. Media player program material can be used as the MOH source. 2. Bass & Treble Separate controls for bass and treble allow adjustment of tonal quality. 3.
Panel Descriptions Rear Panel 8 7 9 10 CLASS 2 WIRING ACCEPTABLE 24V DC IN + – COM 4 OUTPUT 8 25V TEL IN MOH 70V LEVEL LEVEL SOURCE SELECT 0 IN4 0 10 10 PLAYER INPUT 3 INPUT 2 LINE PP MIC LINE PP MIC INPUT 1 LINE PP MIC MIC + PHANTOM POWER PP L MUTE SEND R 16 11 REC OUT INPUT 4 15 14 ON 13 7. External DC Supply Input OFF 12 13. Inputs 2 & 3 - Balanced LINE/MIC Connections for an external 24V DC supply to power the amplifier.
Output Connections Speaker Outputs The amplifierʼs speaker output terminal strip provides connections for 70V and 25V speaker systems, as well as low-impedance speakers loads of 4- or 8-ohm impedance. Connect one end of the speaker load to the COM terminal and the other side of the load to the terminal corresponding to the type of system being driven (transformer-coupled 70/25V speaker or low-impedance speakers without transformers).
Input Connections Balanced - TEL Input The TEL input is a transformer-balanced input. The telephone signal should be Dry Audio with no DC voltage between the signal lines. If the telephone has a DC voltage across it, a telephone interface adapter should be used to provide a compatible signal for this input. Wire one of the signal lines “+” terminal and the other to the “-” terminal. Generally there is no shield for the telephone signal, but if the cable has one, connect it to the G terminal.
Operation Level Controls The amplifier provides separate input level controls on the unit front panel for rear inputs 1 through 4. Turn knobs clockwise to increase, or counterclockwise to decrease levels. Bass & Treble Controls Bass and treble controls are located on the front of the unit to provide tailoring of the unitʼs frequency response. TEL Input Level Control The volume level of the TEL Input is located on the rear panel of the amplifier.
Operation Media Player (for Models CC4052m & CC4062MBT) The Media Player can play MP3 or WMA files from either an SD card or a USB memory stick inserted into the player on the front panel of the amplifier. Pushbuttons on the front of the media player control operation functions and an LCD screen displays status information (see below). Media player program material is muted by both the TEL Input and Input 1 (when Mute Send is on). Media Player program is never muted on the MOH Output.
Operation Bluetooth (for Model CC4062MBT Only) To setup the amplifier to use Bluetooth input, you need a Bluetooth transmitter. This can be a smartphone, MP3 player, laptop, PC, etc. that supports A2DP stereo music protocol. “CC4062MBT” will show up as the recognized device on the Bluetooth transmitter. From the moment the power button of the CC4062MBT is turned on, the amplifierʼs integrated antenna will constantly seek to pair up with a Bluetooth transmitter.
Cooling Ventilation The amplifier is passively cooled so care must be taken to make cool air available to the amplifier. Do not operate this amplifier in environments that get hotter than 100 deg. F. If the amplifier is to be free standing, do not remove the feet on the amp since they provide a space on the bottom of the amp for cooling air intake. Likewise do not slide books or papers under the amp which will reduce the intake area for the cooling air.
Limited Warranty; Exclusion of Certain Damages The Bogen CC4052, CC4052m, and CC4062MBT Amplifiers are warranted to be free from defects in material and workmanship for three (3) years from the date of sale to the original purchaser.
