Datasheet

50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: [phone]; FAX: [phone]; www.bogen.com
S86 Cone Loudspeaker The loudspeaker shall be a Bogen model S86 (or transformer-coupled S86T725 or
S86T725BR), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50 Hz to 12 kHz.
Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 6 oz. ceramic magnet, a
3/4" inch voice coil, and a power handling capacity of 7W, minimum. Mounting holes shall be provided for attach-
ing an optional transformer. Speaker depth shall be 3-1/4".
(For S86T725 add) A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and
providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts, shall be included. The transformer primary and secondary
leads shall be stripped, tinned, and shall be at least 6" in length.
(For S86T725BR add) A terminal strip shall be provided for connection of the audio line. Terminals shall be
labeled for 4, 2, 1, 1/2, 1/4, and 1/8-watt connection.
S810 Cone Loudspeaker The loudspeaker shall be a Bogen model S810 (or transformer-coupled S810T725),
or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 70 Hz to 15k Hz. Axial sensitivi-
ty shall be 96 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 10 oz. ceramic magnet, a 1" voice coil,
and power handling capacity of 15 watts, minimum. Mounting holes shall be provided for attaching an optional
transformer. Speaker depth shall be 3-1/4".
(For S810T725 add) A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and
providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts, shall be included. The transformer primary and secondary
leads shall be stripped, tinned, and shall be at least 6" in length.
Architect
and Engineer
Specifications