Operating instructions

34 GMS810-/GMS811-FIDOR · Operating Instructions · 8013911 V1-0 · © SICK AG
Operation
Subject to change without notice
5.1 Controls and indicators/displays
Fig. 6 Operating and display elements (exemplary display)
5.1.1
Status, LEDs.
POWER
FAILURE
MAINTENANCE
REQUEST
MEAS
.1
Status bar
FIDOR:MEASURING
Main menu
1 Language
2 User level
3 BCU
8 FIDOR
.\
Back
Enter
Menu-specific buttons
Current menu tree
Classification LEDs
(
 p. 34, §5.1.1 )
“POWER” LED
Current menu with menu level (numeric)
Contrast setting
(<MEAS>button)
<MEAS> button
LED Significance/possible causes
POWER
The FIDOR is switched on, mains voltage is available.
FAILURE
The FIDOR is in “Failure” state.
MAINTENANCE
REQUEST
The FIDOR is in “Maintenance request” state and/or the “Maintenance mode” state
has been activated manually.
Status LED Significance Status signal
Maintenance
request
Yellow Irregularities (e.g. deviation during adjustment
too high) that require a review of the cause.
Maintenance request
Maintenance
mode
Yellow The FIDOR is switched to “Maintenance mode”
via the menu or program.
The status bar shows: “FIDOR:Maintenance”.
Check
Check Yellow Initializing, adjustment, etc. Check
Uncertain Yellow Measurement is uncertain ---
Failure Red Failure Failure