Operating instructions

Operation
GMS810-/GMS811-FIDOR · Operating Instructions · 8013911 V1-0 · © SICK AG 35
Subject to change without notice
5.1.2 Assignment of buttons
Button Significance
<MEAS> button
<MEAS> Returns to the Measuring display from any menu (except “Diagnostic”).
– All inputs not completed with <Save> are discarded.
– If the FIDOR is set to “Maintenance”: Pressing the <MEAS> button does not affect the
“Maintenance” state.

If the MEAS button is pressed for more than 2 seconds:
A menu for contrast setting is shown
Menu-specific buttons
<Menu> Leads to the main menu.
If the <Menu> button is not shown: Press <MEAS> first.
<Back> Leads to the higher level menu.
All inputs not completed with <Save> are discarded.
<Enter> Opens the selected menu.
<Save> Saves changed parameters.
<Start> Starts the displayed action.
<Set> Saves the value.

Moves/scrolls downward.

Moves/scrolls upward.
When digits are entered: Next higher digit.

Move to the right in the line.
<Diag> Diag is shown only when there is a message.
When this button is pressed, the current message is shown.
More information on diagnosis
 p. 42, §5.2.5