Operating instructions

Operation
GMS810-/GMS811-FIDOR · Operating Instructions · 8013911 V1-0 · © SICK AG 45
Subject to change without notice
5.2.6 Parameter
Menu: FIDOR/Parameter
5.2.6.1 Measured values
Menu: FIDOR/Parameter/Meas. display
5.2.6.2 End value
Menu: FIDOR/Parameter/End value
This menu serves to set the parameters for the end value.
Menu item Significance
Decimal places Number of decimal places
Enter with <Set>, <>, <Save>.
Menu item Significance
End value Input of end value.
Enter with <Set>, <>, <Save.>
The measuring unit is predefined (input see below).
Meas. unit ppmC3 Input of measuring unit ppmC3.
Save with <Set>.
Meas. unit mgC Input of measuring unit mgC.
Save with <Set>.
Analog output Mode:
Analog output: 0-20 mA or 4-20 mA.
Enter with <>, <Save>.
Activation:
– Measuring: Analog output is active only during “Measuring”.
– Meas.+Adjust: Analog output is active during “Measuring” and “ADJUSTMENT”.
– Always: Analog output is always active.
.4.3
 p. 45, §5.2.6.1
 p. 45, §5.2.6.2
 p. 46, §5.2.6.3
 p. 46, §5.2.6.4
 p. 46, §5.2.6.5
 p. 46, §5.2.6.6
 p. 47, §5.2.6.7
 p. 47, §5.2.6.8
FIDOR:MEASURING
Back
Enter
Parameter
.\FIDOR
1 Meas. display
2 End value
3 Reference gas
4 Sample gas
5 Sample gas spec.
6 Measuring point
7 Gas timing
8 Application area
.4.3.2
FIDOR:MEASURING
Back
Enter
End value
.\FIDOR
1 End value
3 Meas. unit ppmC3
5 Meas. unit mgC
10 Analog output