AUTO-REVERSE CASSETTE TAPE PLAYER AND FM-STEREO/AM TUNER Model CR100A Specifications subject to change without notice. © 1999 Bogen Communications, Inc. Part No. 54-5070-02 Printed in Korea.
Description The Bogen Model CR100A is a compact, integrated unit consisting of an autoreversing cassette tape player and a FM-stereo/AM tuner*. The CR100A provides an economical source of background music for Bogen sound systems.
Controls and Functions 2 3 7 13 8 6 4 1 11 12 14 15 10 5 9 CR100A FRONT VIEW Operating Instructions 1. On/Off Switch and Volume Control - To turn the unit on, rotate the knob clockwise until an audible click is heard. Further clockwise rotation will increase the volume level. 2. Balance Control - Move the slider control to obtain the most desirable stereo effect. To increase the sound level in the right speaker, move the slider control to the right.
7. Eject Button - Press this button to eject the cassette tape. 8. Cassette Tape Door - Insert a cassette tape sideways with the tape side facing toward the right. 9. Digital Display - The display indicates station frequency and other functions. 10. Band Button - Each time the BAND switch is pressed, the radio frequency band will be switched in the following sequence: FM1, FM2, FM3,AM and then it will repeat the sequence. 11.
Operations RADIO OPERATION 1. Turn the unit on by turning the Volume control knob clockwise. 2. Select either FM1, FM2, FM3, or AM mode. 3. Tune to a desired station, manually or automatically, with the Manual tuning, Seek or Preset buttons. 4. Adjust the Volume and Balance controls to your liking. 5. The stereo indicator light is on the Digital display when FM stereo broadcast is being received. 6. To turn off the unit, rotate the volume control knob counterclockwise until you hear a click.
Important Routine Maintenance To avoid the need for frequent servicing, we strongly recommend periodic cleaning of the tape head, capstans, and pinch rollers. This will also ensure high-quality reproduction of programmed material. The unit should be cleaned after every 20 to 30 hours of operation. A high-quality cassette cleaning cartridge can be used, however, if one is not readily available, proceed as follows: 1. Saturate a cotton swab with isopropyl alcohol. 2.
Specifications FM Tuner Section Frequency Usable Sensitivity Frequency Response Signal/Noise Ratio Stereo Separation 87.5MHz-108MHz 10dB 30Hz-15KHz 60dB 35dB (at 1KHz) AM Tuner Section Frequency Range Sensitivity 522KHz-1620KHz 30dB Cassette Deck Section Tape Speed Wow and Flutter Fast Winding Time Frequency Response Stereo Separation Signal/Noise Ratio 4.75 cm/Sec. 0.35% (at 3KHz) 185 Sec.
50 Spring Street, Ramsey, NJ 07446 Tel. 201-934-8500 / Fax: 201-934-9832 / www.bogen.
