Data Sheet

The Bogen CS1EZ is a pre-assembled 1-watt single-tap ceiling speaker designed for use with 70V amplifier

systems. Comprised of an 8" cone speaker and 13" diameter steel ceiling grille with an off-white enamel

finish, the CS1EZ includes a rear-mounted screw terminal board for fast, easy installation. An accessible

volume control knob is located on the faceplate.

• 1W single-tap design

• Screw terminal connections for fast installation

• Works with 70V amplifier outputs

• 8" cone speaker for excellent audio quality

• Heavy-duty, wire-wound volume control with knob

• Pre-assembled for faster installation

• Tile bridge (Model TB8) available to support the

weight of the speaker (not included)

Easy Design

Ceiling Speaker

Model CS1EZ

Description

Features

Specifications subject to change without notice.

54-8006-01C 1602

Power Rating (RMS): 1-watt continuous

Frequency Response: 50 Hz to 12 kHz

Impedance: 4900 ohms (for use on 70V amplifier outputs)

Sound Pressure Level: 95 dB @ 4 ft. with a 1-watt input on axis

Dimensions: 13" Dia. X 3-1/4" D

Product Weight: 3 lb.

Finish: Semi-gloss, off-white enamel

Technical

Specifications

The ceiling speaker shall be a Bogen Model CS1EZ,

or approved equivalent ceiling speaker. The fre-

quency response shall be 50 Hz to 12 kHz. The on

axis sound pressure level shall be 95 dB, at least

four feet with one watt input. Rated power output

shall be 1 watt, RMS continuous. The unit shall have

an impedance of 4900 ohms.

The ceiling speaker shall be comprised of an eight-

inch cone speaker with a 70V matching transformer

mounted on a steel ceiling grille painted with off-

white enamel. The unit shall measure 13" Dia. by

3-1/4" D. Product weight shall be 3 lb.

Architect &

Engineer

Specifications

www.bogen.com