DST1 Digital Stereo Tuner Userʼs Manual © 2009 Bogen Communications, Inc. Specifications subject to change without notice.
Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, information is subject to change. Important Safety Information WARNING: To Reduce The Risk of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Always follow these basic safety precautions when installing and using the unit: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions. Keep these instructions. Heed all warnings.
IMPORTANT CAUTION:TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Before You Begin Your Bogen DST1 Digital Stereo Tuner incorporates the latest in PLL digital circuitry for reliable performance for years to come. To get the maximum benefit from your Bogen product, please read all instructional materials provided with the unit.
Front Panel Controls 1 3 5 7 DIGITAL AM/FM STEREO TUNER FUNCTION POWER INTRO MEMORY AM/FM TUNING + ST/MO - CHANNEL + TUNING - 2 4 6 8 7 1. POWER: Turns power to the unit ON or OFF. 2. Power LED: Lights to indicate that unit is powered ON. 3. INTRO: Scans preset stations. 4. MEMORY: Activates memory to save station preset. 5. CHANNEL +/- : Manually scrolls through programmed presets. 6. AM/FM: Switches between AM and FM operation. 7. TUNING: Tunes station frequency down (-) or up (+). 8.
Remote Control AM/FM MEM 1 2 CH+ 3 4 4 TU– TU+ 3 5 CH – INTRO ST/MO 7 6 All of the front panel control functions can also be adjusted by the remote control. 1. 2. 3. 4. 5. 6. 7. AM/FM: Switches between AM and FM operation. MEM: Activates MEMORY to save station preset. CH +/CH - : Manually scrolls through stations from available presets. TU -/TU + : Tunes station frequency down (-) or up (+). MUTE: Mutes audio output (not available on front panel). INTRO: Scans preset stations.
Antenna Connection FM Dipole Antenna The indoor dipole antenna provided should be adequate for normal FM reception. 1. Connect the antenna leads to the two terminals marked 300 Ohms (FM and GND). 2. Position the antenna for the best reception. Tack it to a wall or baseboard if possible. For reception when the DST1 is installed in a rack, an external antenna installed in accordance with National Electric Codes may be required.
To Select a Band* Press the button marked AM/FM. The current band selected (either AM or FM) appears on the display. You can preset up to 60 stations total for both bands. Preset stations may be any combination of AM and FM stations. FM stations may be played in either stereo or mono. Press the STEREO/MONO button to change mode. To Tune a Station* Pressing the TUNING + or TUNING - button advances to the next frequency.
Specifications Band Coverage: Tuning: Channel Indicator: Station Tuning: Preset Memory: Memory Scan: Antenna Connectors: Output: Program Selection: Output Terminals: Controls: Accessories Included: Operating Voltage: Dimensions: Weight: FM: 87.00 to 108.
Limited Warranty, Exclusion of Certain Damages The Bogen DST1 Digital Stereo Tuner is warranted to be free from defects in material and workmanship for two (2) years from the date of sale to the original purchaser.
50 Spring Street, Ramsey, New Jersey 07446, USA Tel. 201-934-8500 • Fax: 201-934-9832 www.bogen.
