Data Sheet

ManualsBrandsBogen ManualsMicrophoneHDU150

BOGEN MICROPHONES

Models HDU250, HDU150, HDO100, MBS1000A, DDU250, GCU250, GDU150,

MGN19, SCU250, WCU250

Architect and Engineer Specifications

54-5090-01G 1301

Specifications subject to change without notice.

50 Spring Street, Ramsey, NJ 07446 U.S.A.

Tel. 201-934-8500 • Fax: 201-934-9832

www.bogen.com

Description

The HDU250 is a dynamic microphone

ideal for acoustically-demanding envi-

ronments. It features a heavy zinc die

cast case with a rigid, low noise cable-

mount system and a lockable silent reed

switch. It has an extra low handling

noise, floating, shock-mounted

Neodymium capsule.

Features

• Cardioid pickup pattern

• High sensitivity Neodymium capsule

• High output design with excellent gain before feedback

characteristics

• High sound pressure capability without distortion and low

sensitivity to breath/pop noise

• Efficient shock-mount system reduces handling and cable noise

• Rugged, reliable construction

• Integral multi-layer breath/wind filter

• Low-impedance operation

• Lockable, silent on/off reed switch

• Includes mic clip

HDU250 - Professional Stage

HDU250 - The microphone shall be a Bogen Model HDU250.

It shall be a cardioid, dynamic handheld microphone with a frequency

response of 50 Hz to 18 kHz and a 250-ohm impedance. The sensi-

tivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater

than 65 dB. It shall have a sliding-type on/off switch and a rubberized

black finish. The HDU250 shall have an XLR Male connector.

Dimensions shall be 7" D x 2" Dia. Weight shall be 13 oz.

HDU150 - The microphone shall be a Bogen Model HDU150.

It shall be a cardioid, dynamic handheld microphone with a frequency

response of 70 Hz to 15 kHz and a 500-ohm impedance. The sensi-

tivity shall be -70 dB (+/- 3dB) and the signal-to-noise ratio greater

than 65 dB. It shall have a sliding-type on/off switch and a rubberized

black finish. The HDU150 shall have an XLR Male connector.

Dimensions shall be 6-

/2" D x 1-

/2" Dia. Weight shall be 13 oz.

HDO100 - The microphone shall be a Bogen Model HDO100.

It shall be an omni-directional, dynamic handheld microphone with a

frequency response of 70 Hz to 15 kHz and a 500-ohm impedance. The

sensitivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater

than 65 dB. It shall have a silent on/off lockable reed switch and a rub-

berized black finish. The HDO100 shall have an XLR Male connector.

Dimensions shall be 6-

/2" D x 1-

/2" Dia. Weight shall be 13 oz.

MBS1000A - The microphone shall be a Bogen Model MBS1000A.

It shall be a dynamic-type, cardioid, dual-impedance desktop micro-

phone. The frequency response shall be uniform from 45 Hz to

15 kHz. Impedance shall be selected via a switch on the underside of

the microphone base. Impedances shall be 500 ohms (matching 125

ohms to 1,000 ohms) or 50,000 ohms (matching 50k ohms or

greater). Voltage output shall be -72 dB at Lo-Z, and -52 dB at Hi-Z.

The microphone shall provide push-to-talk and lift-to-talk operation.

The push-to-talk bar shall include a locking mechanism. Provision shall

be included to defeat lift-to-talk operation. The microphone and relay

switching shall be accomplished with long life DPDT professional leaf

switches. The microphone circuit shall be wired normally open. The

microphone shall be in an ABS plastic case with a rubberized black fin-

ish and a die-cast base. It shall be supplied with 7 feet of 4-conductor

cable, 2 conductors individually shielded, and shall be permanently

wired into the microphone. Dimensions shall be 4-

/8" W x 9-

/8" H

x 5-

/8" D. Weight shall be 1-

/4 lb.

DDU250 - The microphone shall be a Bogen Model DDU250. It shall

be a cardioid, dynamic desktop microphone with a frequency response

of 100 Hz to 12 kHz and a 500-ohm impedance. The sensitivity shall be

-76 dB (+/- 3dB) and the signal-to-noise ratio greater than 65 dB.

It shall have a push-to-lock/push-to-talk switch and a matte black finish.

It shall have a 10', 4-conductor, 2-shielded cable. Dimensions shall be

/4" W x 18-

/4" H x 6-

/4" D. Weight shall be 3-

/2 lb.

GCU250 - The microphone shall be a Bogen Model GCU250. It shall

be a cardioid, back electret condenser gooseneck microphone with a

frequency response of 50 Hz to 18 kHz and a 250-ohm impedance.

The sensitivity shall be -65 dB (+/- 3dB) and the signal-to-noise ratio

greater than 65 dB. Max SPL @ 1% THD shall be greater than 130 dB.

It shall have a non-glare black finish. The GCU250 shall have an XLR

male type connector. It requires an external 9V - 52V DC phantom

power source. Dimensions shall be 18-

/2" L. Weight shall be 4 ounces.

GDU150 - The microphone shall be a Bogen Model GDU150. It shall

be a cardioid, dynamic gooseneck microphone with a frequency

response of 100 Hz to 12 kHz and a 500-ohm impedance. The sensi-

tivity shall be -75 dB (+/- 3dB) and the signal-to-noise ratio greater

than 65 dB. It shall have a push-on/push-off talk switch mounted on its

base and a non-glare black finish. The GDU150 shall have an XLR Male

type connector. Dimensions shall be 16-

/4" L. Weight shall be 11 oz.

MGN19 - The microphone shall be a Bogen Model MGN19 dynam-

ic-type, omni-directional microphone. Frequency response shall be

uniform from 50 Hz to 12 kHz, with a presence boost at 2 kHz for

natural, intelligible sound. Impedance shall be 400 ohms. A sealed

push-to-talk microswitch shall be mounted on the microphone hous-

ing. The sensitivity shall be -76 dB (+/- 3dB). The microphone shall be

furnished with a 19" chrome-plated flexible gooseneck and mounting

flange and seven feet of rugged synthetic-jacketed 4-conductor,

2-shielded cable. The microphone shall have a black plastic cap and

housing with chrome-plated screen and shall measure 4-

/8" long with

a maximum diameter of 1-

/8". Removable set screws shall secure the

front cap to the microphone and the microphone to the gooseneck.

Dimensions shall be 23-

/2" L. Weight shall be 1-

/4 lb.

SCU250 - The microphone shall be a Bogen Model SCU250. It shall

be a cardioid, back electret condenser boundary microphone with a

frequency response of 20 Hz to 18 kHz and a 250-ohm impedance.

The sensitivity shall be -58 dB (+/- 3dB) and the signal-to-noise ratio

greater than 65 dB. It shall have a matte black finish and will require

an external 9V - 52V DC phantom power source. It shall have a male

XLR connector. Dimensions shall be 2-

/4" W x

/4" H x 3-

/4" D. Weight

shall be 11 oz.

WCU250 - The microphone shall be a Bogen Model WCU250 hang-

ing microphone. It shall be a cardioid, back electret condenser micro-

phone with a frequency response of 50 Hz to 18 kHz and a 250-ohm

impedance. The sensitivity shall be -65 dB (+/- 3dB) and the signal-to-

noise ratio greater than 65 dB. It shall have a matte black finish and will

require an external 9V - 52V DC phantom power source with a con-

necting cable of 20'. It shall have a female mini-XLR connector with a

mini-XLR to standard XLR (male) adapter. Dimensions shall be

/4" D x

/2" dia. Weight shall be 5 ounces.

Introduction

Bogen’s line of microphones come in a variety of types and styles (handheld, desktop, gooseneck, boundary, and overhead hanging) to meet any

and all application needs ranging from paging systems to instrument and vocal reproduction. Each is ruggedly constructed to withstand the

demands of sound installations.

Each microphone provides clear, natural, intelligible sound reproduction with accurate response and dependable performance. Bogen’s

microphone models are crafted with professional-grade features, including models with rubberized grips; quiet on/off glide switches; dent-proof

screens; contemporary designs; and a variety of accessories including stands, mounting clips, windscreens, and cables.

Index

Handhelds (HDU250, HDU150, HDO100)..............................................................................................................................................................1-2

Desktops (MBS1000A, DDU250) ..............................................................................................................................................................................3

Goosenecks (GDU250, GCU150, MGN19) ............................................................................................................................................................4-5

Boundary (SCU250) ......................................................................................................................................................................................................6

Overhead (WCU250)....................................................................................................................................................................................................6

Accessories ......................................................................................................................................................................................................................7

Architect and Engineer Specifications ........................................................................................................................................................................8

Polar Graph

Frequency Response Graph

Specifications

MIC Type: Handheld

Element: Moving coil dynamic

Polar Pattern: Cardioid

Impedance: 250-ohm

Frequency Response: 50 Hz to 18 kHz

Sensitivity*: -72 dB +/- 3dB

S/N Ratio: >65 dB

Connector: XLR Male

Switch: With sliding-type on/off switch

(lockable, silent reed switch)

Dimensions: 7" D x 2" Dia.

Product Weight: 13 oz.

Material: Zinc die cast

Finish: Rubberized black finish

* (0dB=1V/μ BAR 1,000 Hz indicated by open circuit)

Summary of content (8 pages)

PAGE 1
Architect and Engineer Specifications HDU250 - The microphone shall be a Bogen Model HDU250. It shall be a cardioid, dynamic handheld microphone with a frequency response of 50 Hz to 18 kHz and a 250-ohm impedance. The sensitivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater than 65 dB. It shall have a sliding-type on/off switch and a rubberized black finish. The HDU250 shall have an XLR Male connector. Dimensions shall be 7" D x 2" Dia. Weight shall be 13 oz.
PAGE 2
Description Description The HDU150 is an attractive, dynamic, allpurpose microphone ideally suited for a wide variety of vocal and sound reinforcement applications. The HDO100 is an attractive, dynamic microphone perfectly-suited for public address applications and instrument sound reproduction.
PAGE 3
SCU250 - Boundary WCU250 - Overhead Hanging MBS1000A - Desktop Paging DDU250 - Dynamic Desktop Description Description Description Description The SCU250 is an unobtrusive, surface-mount, boundary, condenser microphone ideal for meeting rooms, conferences, and stage productions where minimum visibility is ideal. It requires an external 9V - 52V DC phantom power supply. The WCU250 is an electret condenser, professional microphone perfectly-suited for picking up audio from large groups.
PAGE 4
GDU150 - Dynamic Gooseneck GCU250 - Condenser Gooseneck MGN19 - Dynamic Gooseneck Description Description Description The GCU250 is a high performance, partially-rigid, adjustable gooseneck condenser microphone capable of meeting the stringent demand of today's conference and PA systems. It is an intelligent choice for sound reinforcement applications. It has an integral XLR male connector mounting base and requires a 9V - 52V DC phantom power source.
PAGE 5
GDU150 - Dynamic Gooseneck GCU250 - Condenser Gooseneck MGN19 - Dynamic Gooseneck Description Description Description The GCU250 is a high performance, partially-rigid, adjustable gooseneck condenser microphone capable of meeting the stringent demand of today's conference and PA systems. It is an intelligent choice for sound reinforcement applications. It has an integral XLR male connector mounting base and requires a 9V - 52V DC phantom power source.
PAGE 6
SCU250 - Boundary WCU250 - Overhead Hanging MBS1000A - Desktop Paging DDU250 - Dynamic Desktop Description Description Description Description The SCU250 is an unobtrusive, surface-mount, boundary, condenser microphone ideal for meeting rooms, conferences, and stage productions where minimum visibility is ideal. It requires an external 9V - 52V DC phantom power supply. The WCU250 is an electret condenser, professional microphone perfectly-suited for picking up audio from large groups.
PAGE 7
Description Description The HDU150 is an attractive, dynamic, allpurpose microphone ideally suited for a wide variety of vocal and sound reinforcement applications. The HDO100 is an attractive, dynamic microphone perfectly-suited for public address applications and instrument sound reproduction.
PAGE 8
Architect and Engineer Specifications HDU250 - The microphone shall be a Bogen Model HDU250. It shall be a cardioid, dynamic handheld microphone with a frequency response of 50 Hz to 18 kHz and a 250-ohm impedance. The sensitivity shall be -72 dB (+/- 3dB) and the signal-to-noise ratio greater than 65 dB. It shall have a sliding-type on/off switch and a rubberized black finish. The HDU250 shall have an XLR Male connector. Dimensions shall be 7" D x 2" Dia. Weight shall be 13 oz.