Spec Sheet
• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deep bass response
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts) - 32, 16, 8, 4, 2, and 1
• 16-ohm input for non-transformer, multi-speaker
systems
• Long-lasting, durable polycarbonate cone
• Compounded rubber surround for lasting performance
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Easy to install mounting system
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet
provides protection for connections
• White textured finish easily painted to match theme
decors
• Attractive, contemporary, sturdy steel grille assembly
with fine perforations
• Accessory tile bridge support ring (Model TBCR sold
separately)
• Accessory 10-foot long cable kit (Model CK10 sold sep-
arately)
Features
Description
Specifications subject to change without notice.
© 2003 Bogen Communications, Inc.
Part No. 54-8016-03A Printed in U.S.A. 0303
High-Fidelity
Ceiling Speaker
Model HFCS1
The Bogen HFCS1 ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments.
The system can be easily installed in hard surfaced ceilings, suspended ceilings, and new constructions.
The HFCS1 offers several levels of power output via a front-mounted rotary switch.The low-distortion speaker design, cou-
pled with dual front exit ports, delivers high intelligibility and exceptional low-frequency response for both music and speech
reinforcement.
SPECIFICATIONS
HFCS1
Frequency Response (-10 dB)
*
65 Hz to 19 kHz
LF Driver 6-
1
/2" PolyCone
HF Driver 20 mm (3/4") Polycarbonate Dome
Sensitivity (1W/1 M) 89 dBspl (Average 100 Hz - 10 kHz)
Impedance Ratings
Low (16 ohms) / High (70V/100V)
Power Input (Max.)
75W @ 16 ohms; 32W @ 70V/100V
Power Settings (in watts)
†
70V: 32, 16, 8, 4, 2, 1 / 100V: 32, 16, 8, 4, 2
Baffle Material Fire-rated (94VO) ABS
Back Can Material Heavy-Gauge Plated Steel
Terminations 4 Terminal Snap-Lock Input Connector
Product Weight 9 lb.
Speaker Dimensions
12-
5
/16" dia. x 12" D
Vertical Clearance Requirement
Minimum 11" (From Mounting Surface Front)
Included Accessories
Input Terminal Cover (2 Halves); (4) Screws; (1) Snap-Lock Input Connector
Optional Accessories
Tile Bridge Support Ring (TBCR); Cable Kit (CK10)
Baffle Ring & Grille Color White
Technical
Specifications
*
Half-Space Response
† Front panel, switch-selected