Data Sheet

Power Rating (RMS): 30 Watts continuous (70V amplified systems);
15 Watts continuous (25V amplified systems)
Frequency Response: 300 Hz to 12 kHz
Impedance: 25/70 volts
Power Taps: 70V: 1.8, 3.7, 7.5, 15, or 30 watts
25V: 0.25, 0.5, 0.9, 1.8, 3.7, 7.5, or 15 watts
Sound Pressure Level: 119 dB @ 1m on axis @ 30 watts (avg 400 Hz to 3 kHz)
104 dB @ 1m on axis @ 1 watt (avg 400 Hz to 3 kHz)
Dispersion: 70° x 95°, rotatable horn flare
Dimensions: 14-3/8" W × 8-1/4" H × 12-7/8" D
Product Weight: 6 lb.
Finish: Textured mocha enamel finish on aluminum, matching
polycarbonate horn flare
Technical
Specifications
The loudspeaker shall be a Bogen Model KFLDS30T.
It shall be a wide dispersion, reentrant-type horn
loudspeaker. The frequency response shall be 300 Hz
to 12 kHz. Rated power output shall be 30 Watts
RMS continuous when driven by a 70V amplified sys-
tem and 15 Watts RMS when driven by a 25V ampli-
fied system. Dispersion shall be 70° × 95° with the
rotatable horn flare allowing control of the dispersion
orientation. Sound pressure level, measured 1 meter
on axis at 30 Watts input, shall be at least 119 dBspl.
The unit shall incorporate a seven-position weather-
sealed switch to allow selection of output power
taps. Power tap capacity shall be adjustable at 70V to
1.8, 3.7, 7.5, 15, or 30 watts; and at 25V to 0.25, 0.5,
0.9, 1.8, 3.7, 7.5, or 15 watts.
The loudspeaker shall be of weatherproof aluminum
construction with polycarbonate horn flare. The dri-
ver shall be enclosed within a waterproof housing.
The loudspeaker shall include a self-aligning, field-
replaceable diaphragm.
Screw terminals shall be provided for connection to
the audio line. A plastic cover shall be provided to
protect the connectors and tap selector switch, and
provide strain relief for the audio line. An optional
terminal and tap selector fitting (Model TCSPT1, sold
separately) shall allow placement of rigid or flex con-
duit to wrap to back of horn.
An all-purpose mounting bracket shall provide precise
positioning in the vertical and horizontal planes with a
single wingnut adjustment. The bracket shall include
banding slots to permit mounting the loudspeaker on
beams or pillars and provisions for use of a Bogen
BC1 beam clamp.
Bracket and horn loudspeaker shall be finished in
mocha. The unit shall measure 14-3/8" W × 8-1/4" H
× 12-7/8" D. Product weight shall be 6 lb.
Architect
and Engineer
Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. [phone]; FAX: [phone]; www.bogen.com